Where can I buy oil/water fittings for TD05H turbo?
 

I have the turbo, but no fittings.
I'd like to buy them new, anyone knows of a source for those?
Thanks

Re:Where can I buy oil/water fittings for TD05H turbo?
 

Brand new? uhhh maybe the Mitsubishi dealer? ;)

Or do you mean the adapters and stuff to screw into the banjo holes?

Re:Where can I buy oil/water fittings for TD05H turbo?
 

the water fitting are your standard NPT thread.

goto any store and get some barbed fittings.

Re:Where can I buy oil/water fittings for TD05H turbo?
 

my td04L wasn't npt. they were metric thread. take your turbo to a fitting supply store and they can try various sizes to see if they fit. if not take it with you to a hardware store and try various bolts in it and then go to napa and ask for banjo fittings and banjo bolts that will fit.

Re:Where can I buy oil/water fittings for TD05H turbo?
 

I used NPT fittings and barbs for the coolant on a less-than-complete SOHC Greddy turbo kit with the TD05H-15G

The oil fittings I believe are 10mm X 1.0 (same as the back of the block). Don't quote me. We threw away the exceptionally gay banjo fittings due to some of the parts being lost, and the incredibly gay j-spec anti-AN ends on the oil line wasn't compatible with anything. Cross threaded some nice, soft brass 1/4" flare to 1/8" NPT fittings into the turbo, works great.

Re:Where can I buy oil/water fittings for TD05H turbo?
 

Actually the oil inlet on the turbo is 12mm x 1.25. I just got a new banjo fitting to -4AN from Earl's performance for $21.

Re:Where can I buy oil/water fittings for TD05H turbo?
 

ya man, go to either your local mitsubishi or eagle(depending on what kinda car your turbo came off of, although it shouldn't matter) dealership. They can get the lines for you, it's funny I saw this thread, cause my new lines are supposed to be in tomorrow.

Re:Where can I buy oil/water fittings for TD05H turbo?
 

All the fittings on the mitsu turbos are metric, not NPT... you can make a NPT fitting work, just throw some teflon tape on the fucker and screw it in.. lol, we have done it many times.. Best way is to use the factory banjo bolts, chop off the line, throw a inverted flare on the end, run the hose, and clamp it up.. Works perfect!

Jeff

Re:Where can I buy oil/water fittings for TD05H turbo?
 

I found that brake flare fitings worked perfect for my TD05H, try them, I know they aren't cheap but they are available. ;D

Re:Where can I buy oil/water fittings for TD05H turbo?
 

flared fittings? buying oem lines new and earls fittings seem too pricey for me..