When 1st time run turboed car, what fuel setting? SMC related
Ok so say i got everything done, all oil lines hooked up, all pipes all the injectors are good... and i use a SMC or SMC 500..
what do i set to get it into "safe" mode so i can drive for now to the dyno shop to get it tuned?? |
Re:When 1st time run turboed car, what fuel setting? SMC related
Pick some of the settings in the "settings post" in the engine management section. If you have an air/fuel gauge then just make sure its in rich till you get to the dyno.
|
Re:When 1st time run turboed car, what fuel setting? SMC related
ok but i need SMC settings...
also even at rich, when i arrive at dyno, they still gonna run my car at WOT to redline.. is it safe? |
Re:When 1st time run turboed car, what fuel setting? SMC related
to just drive it to the dyno?...just put it all at -35, it will run real rich
|
Re:When 1st time run turboed car, what fuel setting? SMC related
or u can tow it if you are really worried
|
Re:When 1st time run turboed car, what fuel setting? SMC related
Ok -35.. but what i'm worried is, regardless if i tow or not, the dyno operator doesn't know the A/F unless he runs it at WOT on the dyno to redline, so if he does that, doesn't that pose a risk?
|
Re:When 1st time run turboed car, what fuel setting? SMC related
it should be fine...it will just stutter a little i think from too much fuel....this is all assuming you have 450 injectors
|
Re:When 1st time run turboed car, what fuel setting? SMC related
hmm shutter... ok maybe -38?
|
Re:When 1st time run turboed car, what fuel setting? SMC related
Why not turn the boost down on the first dyno pass so you can see the air/fuel curve. Then straighten out the fuel curve and turn up the boost.
|
Re:When 1st time run turboed car, what fuel setting? SMC related
turning down the boost is not that simple
|
All times are GMT -5. The time now is 02:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands