HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   whats your cheapist turbo setup (https://www.homemadeturbo.com/forced-induction-7/whats-your-cheapist-turbo-setup-7361/)

themadhatter 07-14-2003 02:04 AM

whats your cheapist turbo setup
 
this means from the ground up

kine462 07-14-2003 07:33 AM

Re:whats your cheapist turbo setup
 
i've spent only $600 on everything invluding injectors,smc and all the little bullshit fitting's gaskets and clamps.

krAzy 07-14-2003 11:52 AM

Re:whats your cheapist turbo setup
 
afc-130
dsm injectors-30
t3 turbo-60
hf manifold-40
welding manifold and turbo-10
starion ic -80
oil lines-5
jb weld-5
some misc dsm piping and bov-30
sunpro boost gauge :P-15
air/fuel gauge- 30
clamps-10


about 400 :)

hotrex 07-14-2003 02:59 PM

Re:whats your cheapist turbo setup
 
ihi rhb5
std mani
adapter plate
dsm 450s
msd fuel pump
ghettodyne
2.5 inch dp and charge pipes
custom coach intercooler
all fittings, couplers hoses ect.
pain and suffering
zex plugs
about 1200.

BlinD 07-14-2003 03:37 PM

Re:whats your cheapist turbo setup
 
Mines prolly around the 1,300 mark. Once the exhaust is made and all that good stuff.
14b - $180
adapter plate - $40
btm+smc500 - $180
manifold - $50
tyrus ic - $220
dsm injectors - $40
gauges - $70
mitsu bolts/oil inlet etc.- $70
RRE flanges - $35
1g bov - $30
jc whitney charge pipes - $150
pipes, fittings, couplings - $50

scttydb411 07-14-2003 03:52 PM

Re:whats your cheapist turbo setup
 
td04L off '02 wrx
std manifold
adapterplate
2" jcwhitney mandrel pipes for charge pipes
2.5" jcwhitney mandrel pipes for dp
starion fmic with 2" side inlet/outlet
dsm bov
safc
dsm 450cc inj
resistor box
msd btm
homemade mbc
autometer boost, nordskog a/f, sunpro minitach, autometer bezel
misc gaskets, oil lines, coolant lines
welding
w/b tuning
walbro intank pump (not installed yet)
under 1200

Dr.Boost 07-14-2003 04:29 PM

Re:whats your cheapist turbo setup
 
This should scare some of you:

Super 60 T-3------------$565
FMIC--------------------$335
S-AFC-------------------$275
450cc/with resistor box-$100
Custom manifold---------$200
Oil feed kit------------$089
Silicone couplings------$100
Mandrel bends-----------$078
Blitz turbo timer-------$100
TurboXs RHL BOV---------$175
TurboXs boost controller$050
Gauges and pods---------$200

Theres probably a lot more, but that's what I can think of for a grand total of $2267. A lot of it I already had, but still included it in the price of this kit.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

kyle h. 07-14-2003 04:31 PM

Re:whats your cheapist turbo setup
 
14b - $100
dsm bov - $40
dsm intercooler - $40
dsm injectors - $45
gaskets - $25
pipes - $70
flanges - $60
std manifold + adapter - $80
chip programmer - $100
20 chips - $14
chip socket - $10
fittings/hose - free
studs - $10
pm6 ecu to chip - $45
clamps/connectors - $15
255 lph fuel pump - trade (~free)
boost gauge - $80
gauge cup - $25
laptop - free
software - free
ecu mod (datalogging) - $20

total $779


krAzy 07-14-2003 05:17 PM

Re:whats your cheapist turbo setup
 
wow....you guys apent alot more than me :P

1SlowGuy 07-14-2003 09:14 PM

Re:whats your cheapist turbo setup
 
14b-$250
fmic-$260
ic pipping-$60
dsm 450cc-$40
vafc-$150
blitz BOV-$80
lil crap lil clamps and -----$50 i'm guessing
total=$890 DAMIT :-\ didn't think i spent that much haha


All times are GMT -5. The time now is 01:41 PM.


© 2024 MH Sub I, LLC dba Internet Brands