whats your cheapist turbo setup
#3
Re:whats your cheapist turbo setup
afc-130
dsm injectors-30
t3 turbo-60
hf manifold-40
welding manifold and turbo-10
starion ic -80
oil lines-5
jb weld-5
some misc dsm piping and bov-30
sunpro boost gauge :P-15
air/fuel gauge- 30
clamps-10
about 400
dsm injectors-30
t3 turbo-60
hf manifold-40
welding manifold and turbo-10
starion ic -80
oil lines-5
jb weld-5
some misc dsm piping and bov-30
sunpro boost gauge :P-15
air/fuel gauge- 30
clamps-10
about 400
#4
Re:whats your cheapist turbo setup
ihi rhb5
std mani
adapter plate
dsm 450s
msd fuel pump
ghettodyne
2.5 inch dp and charge pipes
custom coach intercooler
all fittings, couplers hoses ect.
pain and suffering
zex plugs
about 1200.
std mani
adapter plate
dsm 450s
msd fuel pump
ghettodyne
2.5 inch dp and charge pipes
custom coach intercooler
all fittings, couplers hoses ect.
pain and suffering
zex plugs
about 1200.
#5
Re:whats your cheapist turbo setup
Mines prolly around the 1,300 mark. Once the exhaust is made and all that good stuff.
14b - $180
adapter plate - $40
btm+smc500 - $180
manifold - $50
tyrus ic - $220
dsm injectors - $40
gauges - $70
mitsu bolts/oil inlet etc.- $70
RRE flanges - $35
1g bov - $30
jc whitney charge pipes - $150
pipes, fittings, couplings - $50
14b - $180
adapter plate - $40
btm+smc500 - $180
manifold - $50
tyrus ic - $220
dsm injectors - $40
gauges - $70
mitsu bolts/oil inlet etc.- $70
RRE flanges - $35
1g bov - $30
jc whitney charge pipes - $150
pipes, fittings, couplings - $50
#6
Re:whats your cheapist turbo setup
td04L off '02 wrx
std manifold
adapterplate
2" jcwhitney mandrel pipes for charge pipes
2.5" jcwhitney mandrel pipes for dp
starion fmic with 2" side inlet/outlet
dsm bov
safc
dsm 450cc inj
resistor box
msd btm
homemade mbc
autometer boost, nordskog a/f, sunpro minitach, autometer bezel
misc gaskets, oil lines, coolant lines
welding
w/b tuning
walbro intank pump (not installed yet)
under 1200
std manifold
adapterplate
2" jcwhitney mandrel pipes for charge pipes
2.5" jcwhitney mandrel pipes for dp
starion fmic with 2" side inlet/outlet
dsm bov
safc
dsm 450cc inj
resistor box
msd btm
homemade mbc
autometer boost, nordskog a/f, sunpro minitach, autometer bezel
misc gaskets, oil lines, coolant lines
welding
w/b tuning
walbro intank pump (not installed yet)
under 1200
#7
Re:whats your cheapist turbo setup
This should scare some of you:
Super 60 T-3------------$565
FMIC--------------------$335
S-AFC-------------------$275
450cc/with resistor box-$100
Custom manifold---------$200
Oil feed kit------------$089
Silicone couplings------$100
Mandrel bends-----------$078
Blitz turbo timer-------$100
TurboXs RHL BOV---------$175
TurboXs boost controller$050
Gauges and pods---------$200
Theres probably a lot more, but that's what I can think of for a grand total of $2267. A lot of it I already had, but still included it in the price of this kit.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Super 60 T-3------------$565
FMIC--------------------$335
S-AFC-------------------$275
450cc/with resistor box-$100
Custom manifold---------$200
Oil feed kit------------$089
Silicone couplings------$100
Mandrel bends-----------$078
Blitz turbo timer-------$100
TurboXs RHL BOV---------$175
TurboXs boost controller$050
Gauges and pods---------$200
Theres probably a lot more, but that's what I can think of for a grand total of $2267. A lot of it I already had, but still included it in the price of this kit.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#8
Re:whats your cheapist turbo setup
14b - $100
dsm bov - $40
dsm intercooler - $40
dsm injectors - $45
gaskets - $25
pipes - $70
flanges - $60
std manifold + adapter - $80
chip programmer - $100
20 chips - $14
chip socket - $10
fittings/hose - free
studs - $10
pm6 ecu to chip - $45
clamps/connectors - $15
255 lph fuel pump - trade (~free)
boost gauge - $80
gauge cup - $25
laptop - free
software - free
ecu mod (datalogging) - $20
total $779
dsm bov - $40
dsm intercooler - $40
dsm injectors - $45
gaskets - $25
pipes - $70
flanges - $60
std manifold + adapter - $80
chip programmer - $100
20 chips - $14
chip socket - $10
fittings/hose - free
studs - $10
pm6 ecu to chip - $45
clamps/connectors - $15
255 lph fuel pump - trade (~free)
boost gauge - $80
gauge cup - $25
laptop - free
software - free
ecu mod (datalogging) - $20
total $779