What's the word with pop-off valves?

Reply Subscribe

Thread Tools

Search this Thread

01-08-2003, 02:03 PM

#11

Collente

0.0 BAR

Join Date: Jan 2003

Posts: 25

Re:What's the word with pop-off valves?

here is a like to a pop off valve. and no its not a bov..
http://www.rx7.com/cgi-local/3catalog.cgi?cat=9&part=4

A BOV releases pressure under vacume, hence when the throttle plate is closed, so you dont get back pressure on the turbo. it has nothing to do with a wastegate.

01-08-2003, 03:37 PM

#12

Jcushing

1.0 BAR

Join Date: Dec 2002

Posts: 604

Re:What's the word with pop-off valves?

yeah exactly its not at all like a BOV. early 300z turbos have them just incase the wastegate fails... just kinda extra insurance i guess like say you have a deltagate wastegate with a 7psi spring and no boost controller, one minute your at 7 psi the next at 14 hehe

01-08-2003, 05:09 PM

#13

TurboEF9

Guest

Posts: n/a

Re:What's the word with pop-off valves?

Hrm, sounds like this device is the same as the "manual ball bearing boost controller". Only, one end goes out into open air. Hrm.. Possibly save yourself $108 and use of those.

Plus.. can even splurge and get some $1.50 Kryogen paint and spruce it up a bit..

01-08-2003, 06:10 PM

#14

wildman

Guest

Posts: n/a

Re:What's the word with pop-off valves?

I wouldnt.. well it wont hurt. but it wont help either... a bov or a popoff valve releases the extra boost into either open air or piped back into the turbo inlet.. It has quite a large diameter and quickly releases "dumps" the pressure. see when your hard on the boost and release the throttle quickly, the turbo spinning at 75,000 rpm or so is still pumping. This all piles up in the boost tubes as the throttle is closed. the backpressure makes your turbo screetch to a stop. When you get back on it you have to wait for the unit to spool up again "turbo lag". The popoff, bov, or dump valve solves this problem and eliminates lag.

you want one. trust me!