what size couplings?
07-29-2003, 02:10 AM
#1
1.0 BAR
Thread Starter
Join Date: Dec 2002
Posts: 564
what size couplings?
I just received Tyrus intercooler and his intercooler inlet/outlet is 2.5" And my question is that what size couplings do i use to connect the inlet/outlet to the 2.5" Mandrel chargepipes?
I went to home depot to look for some couplings. But i only found some 2" couplings but i think its a bit small. Then I bought some 3" couplings. But it was too big. What can i do?
I went to home depot to look for some couplings. But i only found some 2" couplings but i think its a bit small. Then I bought some 3" couplings. But it was too big. What can i do?
07-29-2003, 09:34 AM
#2
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:what size couplings?
Go to Napa auto parts, and they have some silicone hose, its some nice black rubber ----. Looks like heater hose, you will have to buy it by the foot, but get 2.5in and it works great with his IC's.
Also try boat supply/parts stores..
Jeff
Also try boat supply/parts stores..
Jeff
08-02-2003, 03:18 AM
#3
1.0 BAR
Thread Starter
Join Date: Dec 2002
Posts: 564
Re:what size couplings?
NAPA charge me $40 per feet for the silicon hose. Total of 3 feet and he said he can not cut it for me. So $120 for a silicon hose is expensive.
any other suggestion? How much you got yours for Jeff? What is the part number at NAPA?
any other suggestion? How much you got yours for Jeff? What is the part number at NAPA?
08-02-2003, 04:23 AM
#4
1.0 BAR
Join Date: Jan 2003
Posts: 349
Thread
Thread Starter
Forum
Replies
Last Post
dmakarov
Wanted
3
11-15-2005 06:44 PM
2point2
Forced Induction
7
06-14-2005 08:12 PM
d16forlife
Forced Induction
9
02-06-2004 02:49 AM
