what psi on diy setup
 

what sort of psi can i reach on a home made setup! just read a thread on a different board and they said i could only reach about 13/14 psi im assuming and hopeing this is bullshit!

Re:what psi on diy setup
 

you cant even reach that, unless you have some kind of internals and a nice management system....

sorry to burst your bubble speed racer

Re:what psi on diy setup
 

You could boost as much as you want with proper fuel management and as long as your motor can handle it. Those guys that told you 13-14 psi max are retarded.

Re:what psi on diy setup
 

when they said 13-14 psi they where probably takling about what a unbuilt honda motor would handle.what stops u with diy projects is money and knowlage.

Re:what psi on diy setup
 

first of all don't take anything people from other boards say about turbo's seriously because if they knew anything they would be here..
second, what the hell are you gonna put 13/14psi into? maybe okay with a donut sized VW turbo...

Re:what psi on diy setup
 

lol yea man, 13 - 14 is not a good number by any means

Re:what psi on diy setup
 

they may have been telling you what is safe or something. Sure you can boost yout motor/turbo to 30 psi. DOes that mean it will hold up??? You would want to realize the limits of a stock N/Afirst off and secondly you also wanna know what psi your turbo will start losign effectiveness at. So yeah you can boost that ---- as high as you want, but that doesnt mean it will last

Re:what psi on diy setup
 

<<<ran 13psi daily stock internals no problems

Re:what psi on diy setup
 

what kind of fuel management were u using ghetto? afc hack?

Re:what psi on diy setup
 

smc500 with 450s and a 255 intank