what kind of turbo is this?
1 Attachment(s)
Attachment 7692
Buddy got it off of a 6.9 liter i think he said not sure just wondering if anyone knew what size it excatly is.No other numbers the exhaust is a 5inch outlet v band i think.And its like a T3 but way bigger exhaust inlet not divided or nothing. |
is there a number stamped on the other side
|
found a tag was drunk lastnight so didnt see anything but yeah. tag
Detroit Diesel Alison Part no. 5102352 |
i love that turbo. wanna sell?
|
Have to find out what its good for first if its to big for a 408w im going to build.
|
this turbo is made for 950-1100 cfm.it's for a 12-14 litre detroit diesel'it doesn't support an early spool.way to much lag.
|
damn so its useless even on a bigblock v8?
|
Originally Posted by hy35f2t
(Post 1279339)
damn so its useless even on a bigblock v8?
|
Im copying this build
dyno day 20 psi video part one - Car Videos on StreetFire figure i go with a 383 windsor i can rev it higher which obviously seems to do better then to have a low reving bigger cubic inch motor.Although his is a gt47r what mm would my turbo be about?Or can i just pull the housing off and measure it? Just wish i could find someone running this turbo.Its a t6 inlet. |
Originally Posted by hy35f2t
(Post 1279449)
Im copying this build
dyno day 20 psi video part one - Car Videos on StreetFire figure i go with a 383 windsor i can rev it higher which obviously seems to do better then to have a low reving bigger cubic inch motor.Although his is a gt47r what mm would my turbo be about?Or can i just pull the housing off and measure it? Just wish i could find someone running this turbo.Its a t6 inlet. TurboByGarrett.com - Turbochargers |
Originally Posted by ptours99
(Post 1279338)
this turbo is made for 950-1100 cfm.it's for a 12-14 litre detroit diesel'it doesn't support an early spool.way to much lag.
|
Originally Posted by hy35f2t
(Post 1279556)
just wondering where you found that out?
|
Originally Posted by ptours99
(Post 1279575)
well you said it's from a detroit diesel and i just happen to own one,although my turbo is slightly different,it's a garrett and for a 12.7 litre it flows 950 cfm.
|
Originally Posted by hy35f2t
(Post 1279576)
Hmm so its not the exact sameone right?:p what mm is yours?
|
Originally Posted by ptours99
(Post 1279577)
i don't know but what ican tell you is that these turbos will never be set up for early spool of any kind cuz big diesels have between 1300 1800 lbs of tq,got to save the driveline on the low side see what i mean.
|
Originally Posted by hy35f2t
(Post 1279580)
well it wouldnt be going on a 4cyl go on a V8 383windsor reving to 7k.And heads that flow 300cc's.
|
Nope but i got all the specs on the bore,stroke,what the heads flow dont know if that stuff is needed.
|
turbo it or dont use the search button either way
|
Originally Posted by turbof22a
(Post 1279612)
turbo it or dont use the search button either way
|
All times are GMT -5. The time now is 11:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands