what to do about pcv valve from boost
04-04-2005, 08:26 PM
#42
1.5 BAR
Join Date: Nov 2004
Posts: 783
Re: what to do about pcv valve from boost
*** DIDNT READ ALL OF THE POSTS ***
never really serarched or anything about this question, but since this is the right thread to do so: what do i use for a vaccum "pre turbo" source if im not running a filter?? (mesh screen)
never really serarched or anything about this question, but since this is the right thread to do so: what do i use for a vaccum "pre turbo" source if im not running a filter?? (mesh screen)
04-04-2005, 09:33 PM
#44
!! UNCONFIRMED EMAIL !!
Join Date: Dec 2002
Posts: 2,949
Re: what to do about pcv valve from boost
so is it possible to have a 2 pcv valve system so incase one goes bad and youre at the track the other will take over, and it would be easier on them during high boost. it would look like this
==HOSE FROM BLOCK ==<(Y split) 2 PCV VALVES (Y split)>===Hose to catch can=== [CATCH CAN]===[INTAKE TRACT BEFORE TURBO]
==HOSE FROM BLOCK ==<(Y split) 2 PCV VALVES (Y split)>===Hose to catch can=== [CATCH CAN]===[INTAKE TRACT BEFORE TURBO]
04-04-2005, 11:32 PM
#46
Guest
Posts: n/a
Re: what to do about pcv valve from boost
Originally Posted by Xgenturbo
so is it possible to have a 2 pcv valve system so incase one goes bad and youre at the track the other will take over, and it would be easier on them during high boost. it would look like this
==HOSE FROM BLOCK ==<(Y split) 2 PCV VALVES (Y split)>===Hose to catch can=== [CATCH CAN]===[INTAKE TRACT BEFORE TURBO]
[/quote
why would you do that, with the catch can setup, there is no boost pushing on the pcv, you dont need two
==HOSE FROM BLOCK ==<(Y split) 2 PCV VALVES (Y split)>===Hose to catch can=== [CATCH CAN]===[INTAKE TRACT BEFORE TURBO]
[/quote
why would you do that, with the catch can setup, there is no boost pushing on the pcv, you dont need two
04-30-2005, 08:02 PM
#47
0.0 BAR
Join Date: Apr 2005
Posts: 19
Re: what to do about pcv valve from boost
Ahhhm so WTF r u supposed too do when u dont have an intake pipe on the turbo then? i have my filter clamped directly onto the turbo (no room for an intake pipe) So yea i got no vacuum locations on the plumbing system 
see pic...
see pic...
Thread
Thread Starter
Forum
Replies
Last Post
robs99si
Forced Induction
15
08-29-2004 09:14 PM
used2baracer
Hybrid/Tech
7
06-17-2004 04:41 PM
