HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Well, I broke something today. (https://www.homemadeturbo.com/forced-induction-7/well-i-broke-something-today-9563/)

civicunrest 09-09-2003 11:41 PM

Well, I broke something today.
 
Well, after friday's excusion at the track, my hatch has been, well, ticking. I ran a compression and leakdown test on her today, and I got 155lbs compression and 12% leakdown on cylinders #1-3, and 120lbs compression and 70% leakdown on cylinder #4. So, either I melted a ring land, a ring, or the ring is seized. Either way, it's got the thing rattling to beat hell. This sucks.

leed 09-09-2003 11:48 PM

Re:Well, I broke something today.
 
Shitty dude :( laying down a mean smoke screen too?

ineedturbo 09-10-2003 10:42 AM

Re:Well, I broke something today.
 
i have a spare bottom end if u need it

45psi 09-10-2003 03:08 PM

Re:Well, I broke something today.
 
---- leed, i lay a smoke screen everywhere i go. i can only drive 5 miles at a time until i have to let it cool off. sucks

nyc86zc 09-10-2003 04:47 PM

Re:Well, I broke something today.
 

Originally Posted by civicunrest

Well, after friday's excusion at the track, my hatch has been, well, ticking. I ran a compression and leakdown test on her today, and I got 155lbs compression and 12% leakdown on cylinders #1-3, and 120lbs compression and 70% leakdown on cylinder #4. So, either I melted a ring land, a ring, or the ring is seized. Either way, it's got the thing rattling to beat hell. This sucks.

Sounds familiar. I did the same thing at the track. Before I went my compression was 180 across the board. Once I left it was 180 on three and 100 on one :-\

If you rip your engine apart you'll probably see this:
http://www.imagestation.com/picture/...a/fbb17008.jpg
Broken ring lands.

Semnos 09-10-2003 07:16 PM

Re:Well, I broke something today.
 
yeah running 13 psi daily on stock bottom end has it's drawbacks...but who cares I'm goin to do the same ;D got me some good fuel here RON 98.
And no matter what other people say..it's octane 98.
My dad works at a oil refinary. he worked for shel and works for the Venezuelan oil company..who provides most of it's gas to the states. He sai RON means...I forgot what the R was for well the O is for Octane and the N for Number
R...Octane Number. maybe registeres octane number...? well gonna ask him later when he's online.

Semnos 09-10-2003 07:24 PM

Re:Well, I broke something today.
 
RON = Research Octane Number

civicunrest 09-10-2003 11:02 PM

Re:Well, I broke something today.
 
Sadly, I have a built bottom end. I'm expecting to see broken ring lands, or if I'm lucky, just a seized ring, but we all know it's ring lands. Oh well, nothing like a $500 set of arias pistons GONE. Now I'll just have to bore it and put new, bigger slugs in it. At least it'll get rid of that goddamn piston slap.

Ironically, it runs fine, and there is no oil cloud. I'm gonna take her to the track next friday, and just take it easy (i.e, no full throttle shifts, conservative launch).

I'm pretty sure when she popped out of gear and hit the rev limiter for 3 seconds straight that the fuel cut did her in. Nothing like running super lean at 8k


All times are GMT -5. The time now is 01:37 AM.


© 2024 MH Sub I, LLC dba Internet Brands