Water misting spray for ICs... where to get nozzles?
05-18-2005, 03:28 PM
#11
0.5 BAR
Join Date: Nov 2004
Posts: 144
Re: Water misting spray for ICs... where to get nozzles?
Very accurate scientific test. A big fan set who knows where (looks like it's right infront, exactly where he stands so that makes a nice big hole) using a heat-gun blasting directly into a IC and trying to cool it with a handheld spray gun..
That's like saying a G-Tech Pro is accurate, discount as many variables as possible and assume the result is 100% correct.
That's like saying a G-Tech Pro is accurate, discount as many variables as possible and assume the result is 100% correct.
05-18-2005, 03:59 PM
#13
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: Water misting spray for ICs... where to get nozzles?
that test is flawed because, there is air moving through the intercooler when you're moving. and the air hitting the water makes it cool and evaporate faster.
this is obvious by getting your hand wet, its not that cold, then swing your arm around and it feels cooler.
he needed a fan when doing that test.
this is obvious by getting your hand wet, its not that cold, then swing your arm around and it feels cooler.
he needed a fan when doing that test.
05-18-2005, 06:17 PM
#16
0.0 BAR
Join Date: May 2005
Posts: 33
Re: Water misting spray for ICs... where to get nozzles?
you could use a fuel injector conected to a switch..
or you could just drill a hole in the actual intke piping and install an injector, then spray windshield fluid in the intake... i do it and it works good...
it raises compression, cools the charge, the alcholol raises octane rating, and is verry inexpnsive.
or you could just drill a hole in the actual intke piping and install an injector, then spray windshield fluid in the intake... i do it and it works good...
it raises compression, cools the charge, the alcholol raises octane rating, and is verry inexpnsive.
05-18-2005, 07:07 PM
#17
1.5 BAR
Join Date: Jun 2003
Location: Plant city,fl
Posts: 1,134
Re: Water misting spray for ICs... where to get nozzles?
Originally Posted by d0nfry
just relocate your winshield washer nossles and mount them on your bumper support, when you wanna spray just pull the handle.
I did the and ran the several lines thru a dsm sidemount intercooler.It made a difference on a hot day.
05-18-2005, 09:56 PM
#19
1.0 BAR
Join Date: Apr 2005
Posts: 437
Re: Water misting spray for ICs... where to get nozzles?
He sprayed on 32 ounces of water, that is a decent amount of water when you consider a gallon of water is rougly 2 lbs. You planning on dousing your intercooler with a waterfall of water that you will store where
and will last how long There is also propane injection to look into.
and will last how long There is also propane injection to look into.
Originally Posted by Xgenturbo
Interesting, but I call BS, He used 1 misting bottle, with one nozzle, enough water to do ----, if you had lets say 6 nozzles, high output pressure from the pump and was misting your intercooler that way, i'm sure it would make more than a 4.7% drop in temperature.
And if I'm wrong then there is always water injection
And if I'm wrong then there is always water injection
