Wastegates n BOV's (What the MM mean, Whats the dif)
 

Just looking into external wastegates and BOV's. They have like 38mm 42 mm 50mm

And stuff like that just wonderrin what the difference is and which would be better for which setup. I plan to run 14-16psi if that matters.

Let me know
Thanks

Re:Wastegates n BOV's (What the MM mean, Whats the dif)
 

The first question would be..which one are you looking at..wategate or BOV?

Re:Wastegates n BOV's (What the MM mean, Whats the dif)
 

I think normal turbo setups consist of both.

Are you aware of the functions of those two devices?

Re:Wastegates n BOV's (What the MM mean, Whats the dif)
 

I know a BOV lets out the boost when you let off the throttle when boost has already been built up.

Dont really know what a wastegate does though.

Is on better than the other? External (always mounted on the manifold right?) or internally inside the turbo

Why would you need a 38mm wastegate as opposed to a 44mm

Re:Wastegates n BOV's (What the MM mean, Whats the dif)
 

i belive that the wastegate sets the ammount of boost you require

Re:Wastegates n BOV's (What the MM mean, Whats the dif)
 

how so?

It does come out of the turbo mani right?

Re:Wastegates n BOV's (What the MM mean, Whats the dif)
 

The bigger wastegate diameter is for high power higher flowing engines.

Re:Wastegates n BOV's (What the MM mean, Whats the dif)
 

wastegates control boost by allowing exhaust to bypass the turbo, thus creating less boost. The bigger the wastegate, the better it is going to be able to control a big turbo on a high powered motor

Re:Wastegates n BOV's (What the MM mean, Whats the dif)
 

would a 38 mm external wastegate be good for about 300whp and 15psi?

Re:Wastegates n BOV's (What the MM mean, Whats the dif)
 

Go internal wastegate (which will probably come on the turbo you get) and spend the money on an electronic boost controller. ;)
You don't need all that fancy external wastegate stuff until you have $10,000 for the motor. ;)