HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   vw turbocharger (https://www.homemadeturbo.com/forced-induction-7/vw-turbocharger-10711/)

vwcivictunr 10-14-2003 09:49 PM

vw turbocharger
 
just wondering if anybody can help me out. i work as a vw technician and just aquired a turbocharger k03 off of a volkswagen beetle. i have a 97 civic d16y7. just wondering if anybody has installed a vw turbo on a honda and if anybody has any suggestions on the install.

JD 10-15-2003 02:24 AM

Re:vw turbocharger
 
That turbo is small as my balls in a bucket of icecream. Other than that it should work. I wouldnt plan on pumping too much boost (5-6 psi max) just because of its small size. Also I think VW has a funny bolt pattern on that turbo so you would need a custom adapter plate.

vwcivictunr 10-15-2003 06:32 AM

Re:vw turbocharger
 
the internal wastegate is set at 8 psi as far as i know. the exhaust flange is a little weird on vw turbochargers, but im just gonna cut off a flange off of a downpipe laying around the shop and work my down pipe from there. probably gonna run the 450 safc hack for fuel management. that should be sufficient enough.

88crxSi 10-15-2003 08:13 AM

Re:vw turbocharger
 
you should be ok.. that is the turbo for the 1.8t right? enough to get 180hp from the vw motor should be good for 1.6l

stargazer 10-15-2003 04:45 PM

Re:vw turbocharger
 
it is indeed the same turbo on the 1.8T. My buddy Derek has a 1.8 T and is into the VW tuning scene and I know for a fact that those turbos are capable of making far more than 180 HP. They are wastegated at 8 psi but should be good for upwards of 11 psi when all is said and done.

Bobohc3d 10-16-2003 02:51 PM

Re:vw turbocharger
 
I have this ko3 turbo and its not too bad
Its installed on my d15z6 and it pump 1.1BAR but at higher Rpm ( above 5500RPM the pressure goes down slowly down to 0.6 at 7000RPM )
it spools fast like hell
i have max pressure at 2800RPM
now iam doing a hybryd and ill try to install a Ko4 rotor to make max pressure more stabile.
its a good turbo anyway, i have done 800Miles on it and its still only oil cooled and it works fine.
and because my turbo is melted to my stock header, ill proudly say that iam a real HMT ghetto constructor ;D ;D

Semnos 10-17-2003 08:29 AM

Re:vw turbocharger
 
hahahaha you pulled the welded turbo to a the stock header.

DutchPug 10-17-2003 04:33 PM

Re:vw turbocharger
 
My experiance is that the wastegate is factory set at 5 psi. Had two (one brand new) and both were set at 5.

Anyway, I would go for a bigger turbo if I were you.


Semnos 10-17-2003 04:37 PM

Re:vw turbocharger
 
You got that right Piet ::)


All times are GMT -5. The time now is 05:50 AM.


© 2024 MH Sub I, LLC dba Internet Brands