volvo fmic on 92-95 civic?????????
 

so i went to the junk yard and picked up a volvo fmic. i looked at it compared to my front bumper and i dont know if i can make it fit. anybody ever put one of these on your eg if so you got pics on how you fit it. thanks

http://i114.photobucket.com/albums/n...urbokit001.jpg
i put a stock civic spring just for size referance

Re: volvo fmic on 92-95 civic?????????
 

I have seen it done

You gotta cut some ---- to make it fit and its so tall it will hang alittle below the bumper cover

So go find something better like a saab 6inch frontmount

Re: volvo fmic on 92-95 civic?????????
 

Plastic end tanks for the loss! I know some asshats will claim, "I ranz my Volvo fmic at 65psi on a 35 arhhh and it didn't leaks!" but the bottom line is that metal>plastic when it comes to intercoolers. You can get a Starion fmic for $50-$75 and it's all metal, fits well, and is a fairly decent core for low pressure set-ups. ---- man, I have a Chinese fmic I'll sell you for ass cheap if you're desperate. Bottom line is that if you're hoping to run any sort of real boost; you're going to hate the Volvo fmic. Unless you love boost leaks, weirdly routed piping, and hacking the absolute ---- out of your bumper and support.

Re: volvo fmic on 92-95 civic?????????
 

Those things are ------- massive and just a chinese IC on ebay or like the other dude said. Find a newer saab since they have nice decent size fmic or even one from a Neon SRT4 or even a Evo. They are nice oem IC's and the prices are fairly decent. Otherwise since this is HMT, just hack off a section of it and break out the JB weld.

Re: volvo fmic on 92-95 civic?????????
 

dont think it'll hold for 10-12psi on a gt-17. about the same cfm as 6/7lbs or so on a t3/t4? it is in perfect condision. as for the jb weld thats just a little to much hmt for me....lol.

how much would u want shipped on the ic to 49548

Re: volvo fmic on 92-95 civic?????????
 

Quit being a -----. JBweld IS HMT. Hack the top half of it off, grab a piece of something to cover the hole on the end tank, and JBweld it in place.

Re: volvo fmic on 92-95 civic?????????
 

bingo, turn that piece of ---- into 2 intercoolers.

Re: volvo fmic on 92-95 civic?????????
 

What you MEANT to say is you don't think your setup can handle the power of JB weld and that you need something with a little less strength?

Re: volvo fmic on 92-95 civic?????????
 

jb weld on plastic end tanks and thats supposed to hold 12 psi with out leaking and will hold for a long time? im not so sure about that. has it ever been done with positive results. i've been keepin my eyes open on local forums for sumshin smaller no luck yet.

Re: volvo fmic on 92-95 civic?????????
 

dude, you spend more time dicking around on this forum and you could have already tried this ---- out. If JB weld can cure diabeetus then it can fix your fail of a front mount. Just do it and report back. :1