projekteg

can you use an external wastegate using the existing wastegate housing instead of a block off downpipe flange?

Stan

Just hook up the whole internal wastegate setup and don't run any lines to the wastegate actuator for the internal wastegate.

Stan

shitbird

Or weld the flapper shut.

projekteg

i don't want to weld the flapper shut because i'll eventually get the right flange, i just don't have it now, and won't have it before this weekend when i'm goin to do my install, the whole point of me using an external wastegate was because the actuator doesn't clear my a/c lines and stuff, so there's no way besides welding the flapper shut or leaving the actuator on but unhooked?

chevy

sure there is... all u have to do is just rig somthing up to hold it there....like a very tight spring

projekteg

so you think i could just wire the little arm on the flapper to the compressor housing or something?

shitbird

Weld it there since your not going to be using it after you get your new flange.Or you can tie that swing arm to something.

projekteg

cool, i thought you guys were talking about welding the actual flapper to the exhaust housing.