Where could I get bolt that I could use for my turbo project that nobody could take off without special tools?

 

What are you trying to protect from getting stolen? That'd be a good start.


JP

 

use a socket 1mm smaller and strip some bolt

 

Are you referring to these

• http://www.brycefastener.com/
• http://www.at-fairfax.com/SecurityScrews.htm
• http://www.hudsonfasteners.com/security.htm

 

If they want it bad enouf they will get it But you could try and Pull a stealthmode and weld everything together

 

ya those are pretty neat, to bad anyone with a cordless dremel could turn those into a flat-head in seconds, depends how your gona use them i guess

 

very true...

the best thing to do is find something that makes it harder ... just long enough for you to get you gun...

there is no fool proof method... but the sites posted above are pretty good... or you could get what is refered to as wave guide screws at my work... and basicly its just alon rench bolts... put them on everything... cause majority of people(unless you own a motor cycle ) dont cary allan wrenches... they carry socket sets...

just a thought...

 

if you are trying to protect your turbo from getting stolen, all the ideas dont cover the exhaust manifold. sure they can take the turbo with a socket set..but they can take ur ehaust mani which ur turbo is bolted onto....

 

Or dont worry about it and tack weld a nut onto the header/manifold flange by the block and the one for the turbo. Later on you can just grind the spot welds off. Not every nog will bring something to grind it of and it will be a bitch to hack saw off.

 

Call Skynet and hire a terminator to sit in your car, I bet no one will ever go near it.