turboed crx problems
0.0 BAR
Joined: Feb 2006
Posts: 0
Re: turboed crx problems
Originally Posted by CSaddict
Better yet, send me your ECU and $45 and I will chip it and send it back with a basemap that will run your ----!
Don't tell me you can't come up with $45... and if you don't already have the 450's that's only another $45.
Think about it: for $90 you can make your car not go **** (and actually run really well). Your choice.
Thread Starter
1.0 BAR
Joined: May 2006
Posts: 229
Re: turboed crx problems
i put the 450's i have in and it ran ridicuously rich black smoke and bogging down really bad...i have non turbo injectors and they did fine and it ran pretty good... but whatever... im not puttin those back in...id like to chip it if that would be the best thing to do for cheap... i dont really know anything about fuel man. obviously
0.0 BAR
Joined: Apr 2004
Posts: 0
Re: turboed crx problems
Originally Posted by laports_best_crx
i put the 450's i have in and it ran ridicuously rich black smoke and bogging down really bad...i have non turbo injectors and they did fine and it ran pretty good... but whatever... im not puttin those back in...id like to chip it if that would be the best thing to do for cheap... i dont really know anything about fuel man. obviously
Thread Starter
1.0 BAR
Joined: May 2006
Posts: 229
Re: turboed crx problems
k..this is ridiculus...i dont know anything about fuel managment(and dont say duh no ----)...what the hell do i do to make it run good..and my tool box doesnt shudder i know pretty much anything else but fuel managment
3.0 BAR
Joined: Aug 2003
Posts: 4,664
From: NE-PA
Re: turboed crx problems
Basicly what everyone is trying to tell you is to hold on to your 450's, pay CSaddict $45 to chip your ecu, put the 450's back in WITH the chipped ecu and never have another problem with your management again.
You disappoint me...dx's still didn't have the resistor box...only Si's and HF's. But I can't remember if the car was an Si or not...I just skimmed through the replies since my last post 
Originally Posted by CSaddict
90 crx doesnt need a resistor box, because it comes with one. All he needs is a socket thats about $2 and a ZIF socket for $6 and then a chip for about $2. Thats it. Easy as pie and run some turbo edit.
