turbocharging engine with mono point injection
 

does it work? im ging to use some kind of extra fuel suply.

Re:turbocharging engine with mono point injection
 

talk to sohcrxsi he had a 4dr done ;)

Re:turbocharging engine with mono point injection
 

where can i find him? msn icq?

Re:turbocharging engine with mono point injection
 

it wasnt mono-point, it was duel-point. Pretty much the same thing. I ran a FMU 12:1 at 6 psi for a while, then 9psi, then 12psi with spikes over 15. All this non-intercooled, it actually ran pretty good. The motor finally blew because of a spun rod bearing. Sometimes it would ping but mainly while launching it, and never at 6psi. Just get a FMU and go nuts, if its monopoint it probably sucks anyway, so if it blows its no big loss. If you keep the boost low <7psi, and intercool it, you should be reliable. Heres some pics-

http://www.newbieforces.com/files/civic 004.jpg

http://www.newbieforces.com/files/civic 005.jpg

http://www.newbieforces.com/files/civic 006.jpg

http://www.newbieforces.com/files/civic 007.jpg

http://www.newbieforces.com/files/civic 009.jpg

http://www.newbieforces.com/files/civic 010.jpg

http://www.newbieforces.com/files/civic 012.jpg

I pulled the kit after it blew and sold it for $700 on egay :P

Re:turbocharging engine with mono point injection
 

was that honda equipped with only one injector

Re:turbocharging engine with mono point injection
 

There isn't any honda equiped with one injector...there is carbed...DPFI(Dual point injection) and MPFI (Multi point injection)....that honda he showed is a DPFI...D15B2's are come with DPFI injection

Re:turbocharging engine with mono point injection
 

EDIT I can't read

Re:turbocharging engine with mono point injection
 

dual-point and mono point is pretty much the same thing, just use a FMU