turbo XS RFL
 

yeah i got one and i hooked it up, but i think the spring rate is too hard for my 8 lbs sohc Zc, is there another spring i can put in that is for low boost??? it dosent make any noise at full boost and at idle with 20 in vac. its completely closed any help is welcome

Re: turbo XS RFL
 

are all the washers out of it?

Re: turbo XS RFL
 

with all the washers out it should work good. take the thing apart and grease the slide.

sometimes they bind up. ive seen it happen more than once.

Re: turbo XS RFL
 

if that doesn't work just cut a couple coils off the spring

Re: turbo XS RFL
 

WTF? Who stole my hotrex and replaced him with someone helpful??

Re: turbo XS RFL
 

i had all the washers in at 7psi boost and the bov still sounded like ---- but my vacuum was straight off the intake manifold.

Re: turbo XS RFL
 

wow racall on the rfl then

Re: turbo XS RFL
 

i have an rfl knock off and it works great. i had to cut off a coil though.

Re: turbo XS RFL
 

i had one genuine rfl on my built d series, an it worked mint, i actually had to add a washer or 2.

i just bought the dual horn knockoff for 45 dollars from xoxo racing. donald125 hooked it up. i put her on, and so far at 10-11 psi it works awesome. sounds agressive as hell. but i chalk that up to the massive cfm.

im sure at 20-25 psi ill be adding washrs.

Re: turbo XS RFL
 

thats where i have mines Td into. and it dosent make ANY noise. where am i supposed to put it at (vac)

Re: turbo XS RFL
 

well isnt your vac. source all the same no matter where you tap, assuming there is no leaks?

Re: turbo XS RFL
 

thats what i thought i have my bov in one, boost guage in another and my waste gate in a diff.

everything is working now but as soon as i hooked up the RFL and got on it at 6K i heard nothing where as my dsm would make more noise, BUT im still running open down pipe , well more like open turbo elbow it just poinbts down at the ground (ihi rhb5)

Re: turbo XS RFL
 

I have the dual horn ebay special and i had to cut 4-5 coils off the spring just to make it work. i was running open downpipe for a while and you most likely are not hearing it because of the noise level.