HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - turbo sizes (https://www.homemadeturbo.com/forced-induction-7/turbo-sizes-31724/)

i want to buy this turbo - i think he mixed em up...??

.63 turbine housing with a stage III wheel/shaft. The compressor side has a 57 trim compressor wheel with a .50 A/R ratio housing.

what is the compressor wheel size?
what is the exhaust wheel size?
What does the trim mean?

You are dumb as ----. You just said all the specs and then asked what they were.

wow dude, you told me you knew something about cars, proves my point for the 4th time

So what is the question here?

thats a stage 3 T3 exhaust housing, and a T4 (prolly T04B) compressor

i dont know what the sizes of the turbines are.

actually the a/r has little to do with the physical size of the turbo. thats whats important 8)! best to go on what kind of turbo it is ;D

if someone says that a turbo is a t3/t4 that could still mean that the exhaust turbine could be a t4 and the compressor could be a t3. am i right?

Quote:

Originally Posted by DeleriouS

if someone says that a turbo is a t3/t4 that could still mean that the exhaust turbine could be a t4 and the compressor could be a t3. am i right?

no, you are a ------- waste of space on this board.

punch yourself in the face. cocksucker

u know what...no...i am sick of this ----...i am trying to learn by asking questions - i know a lot about cars, but i do need to clear up a couple of unknown questions. so dont act like you are the smartest ------- ------- hear and make me look like a jackass for asking a simple question. you guys dont always have to riddicule a person for being wrong. chill the ---- out. like its so funny to see people get angry on the internet and talk ----. just if you dont like my question then dont answer it. but for the decent human being out there who will just answer my question and not say another word - THANK YOU.

Quote:

Originally Posted by DeleriouS

i don't have a with the fact that you want to be handfed, the problem is that you don't comprehend anything that is said to you.

just look at the whole uberdata post you made. with all the facts and suggestions people made to you, you still want to run an fmu, don't be ignorant. listen to what people are trying to suggest to you, otherwise you're wasting your time and ours. fuckface

people dont tell everything

i just found out with uberdata that i will need a wideband controller, labtop, and i "have to know how to tune my engine with different fuel maps". i am 17 and i dont know how to do everything in the ------- book. i am learning as i go. i am a very frugal person because i dont MAKE AS MUCH MONEY AS EVERYONE ELSE HERE. i make about $150 a week - and that is good money for me. can someone just help me with what i need for my setup?

i have a 95' ls, b18b
i have
-fmu
-turbo manifold
-oil feed line
-oil return line
-255lph walbro fuel pump
-gauge pod

i am buying soon -t3/t4 tubro
-jrc.com FMIC
-vaccum lines fittings
-wastegate
-bov

what else do i need? i am only going to be pushing 7psi - with this fuel setup. that is all i want to be pushing right now anyways. i dont want to build a ------- 10second car - i will be happy with high 13s low 14s. anyone wanna be
civil and help me?

There is a sticky at the top of this forum with all the info you need. If you would read that you would answer your own questions.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote