Turbo setup for ZC
I'm new to the whole import and turbo scene and i have a few questions. I have a 88 honda civic hatchback gettin ready to put a zc motor in it, and i have a WRX turbo that i bought really cheap and was wonderin if it would work with a HF manifold? it's a tdo4 turbo. Also...will i have to replace the stock map sensor and fuel injectors? and how much boost can i give it without blowin anything? If everything's done right and tuned good how well do u think i would do in the quarter mile?
|
Re:Turbo setup for ZC
o man, ivegot an idea, read a few of the other posts first, they will answer all of your questions
|
Re:Turbo setup for ZC
the turbo of course will need an adapter to the hf manifold, and you can find ideas from the ones showcased on the site here.
the stock map sensor should work fine, no need to change it, but you'll need some sort of either check valves, or a missing link, or an ecu clip to fool it. usually for zc's ive seen lots of 6-8psi setups that prove to be reliable and dont have much of a threat on the engine. and im sure you could get high 13 second times with some borrowed slicks and a little bit of a boost in psi for a run at the track. the most cost effective way to run 6-8psi in my eyes is to add biggar injectors and use the apexi s-afc to control them.... just an option to think about. |
Re:Turbo setup for ZC
Thanx Turbo-Dan for the info, Does anyone know what's the max boost i can get out of a TD04 turbo?
|
Re:Turbo setup for ZC
about 10psi, you could get more, but you are nearing its max effiency.
Jeff |
Re:Turbo setup for ZC
What size fuel injectors should i get? and what vehicles can i get them out of?
|
Re:Turbo setup for ZC
And would i need something to manage the fuel flow through the injectors???
|
All times are GMT -5. The time now is 03:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands