turbo S10
 

any one got a turbo'ed S10? I'm building my buddies truck for him while he's in iraq and I'd like some help on where to get parts like an exhaust mani the one I got is for a cavi and the down pipe will hit the firewall if I use it I was thinking about cutting the flange off the mani I have now and getting the log mani kit from tunertoys I dont know if the B-series one will work or if I need to get the d-series one or if someone has already done this what mani should I use? I tried to search but the search button kept bringing me to a blank page.

-Jason

Re: turbo S10
 

Uhh

#1, since you're using a "cavalier manifold" I'm gonna guess this is the 2.2 sohc?

Re: turbo S10
 

im pretty sure id go with the b-series since it a little bigger but if you wanted to you cut either to work.

Re: turbo S10
 

S-10's dont need a turbo they already Rip

Re: turbo S10
 

ok... :8

Re: turbo S10
 

The only time they "Rip" is when they have a SBC swapped into them. In all honesty, why don't you do a motor swap and drop in a 350 or a 383? Might be a bit cheaper and about the same amount of work.

Re: turbo S10
 

i took these two guys one had a maual I4 with alot of motor work, and the other had a v6 and i smoked them both, there not fast "trucks"

Re: turbo S10
 

yeah its the 2.2 OHV not SOHC, OBX makes manifolds for the 2.2 that looks like it would work but they were expensive for what they were anybody know where I could get a cheaper one? this isnt my truck even if it was I wouldnt swap a 350 or 383 I would sell it and buy a honda but its not my truck or my money I'm just helping him do this, we also looked in to an ecotec swap but finding a RWD trans to bolt to the ecotec is a bitch and I dont wanna ---- with the 2.4 eco out of the colorado.

-Jason

Re: turbo S10
 

just make you own manifold

Re: turbo S10
 

Hey Hey Hey now... i have a 99 blazer ZR2 w/ 33" tires, and 4.56 gears front and back...
It's got the Vortec v6... 265ft/lbs torque... NOT BAD for STOCK... and w/ the gears my truck beats any n/a stock civic >:D

This spring, she's gettin the 5.7 Vortec OBD2 swap.
Direct swap... everything bolts right up... all i need is the v6 flywheel to bolt onto the v8... the v8 wiring harness, and a re-flashed ECU.
SIMPLE!!!! If you want some information on the swap... a great site that i go to is www.zr2usa.com (for the 4x4 s10's)
If your one of them low rider people.... you'll get flamed at that site haha.

Lift that sucker!
Lowered trucks are for wussies who have issues GETTIN IT UP!