Re:Turbo in- Oil spewing from DP
 

Bump- see first post.

Re:Turbo in- Oil spewing from DP
 

if it's happening at idle then you can probably rule out insufficient crankcase ventilation. sounds like the oil is getting backed up. are you sure the return has no kinks in it?

Re:Turbo in- Oil spewing from DP
 

do you have a pic of the engine bay?
I curious about what the manifold looks like and how low the turbo is actually sitting?

Re:Turbo in- Oil spewing from DP
 

Ill go take more pics of the engine bay.

As for kinks, no, but there is that 90 degree bend off the turbo...

I cant install that ball valve that I bought, it doesnt have enough room to screw on either way, so I was wondering if I even need the oil pressure sensor? Could I take it off and screw the ball valve directly to the block?

Re:Turbo in- Oil spewing from DP
 

New pics on first post.

Re:Turbo in- Oil spewing from DP
 

Where is your oil feed line???
from that pic it looks like it's going into the top off
the manifold, but that's not it right?

*edit* i see it in the other pic

try taking it off and inspecting it.
that's all i can think of to do
and just in case check out ebay and pic you up a nother one for 100 bucks or so fro a back up plan. That's what i plan to do incase anything happens.

Re:Turbo in- Oil spewing from DP
 

Oil Valve is installed, I will start it tommorrow and let you all know what happened.

Re:Turbo in- Oil spewing from DP
 

Ok, the valve didnt help, so its either the seals or the 90 deg bend.