http://www.atpturbo.com/Merchant2/me...egory_Code=OIL

One of these? Will it work with my StealthMode feed line?

 

It looks to me like the oil isn't being allowed to drain back into the pan and is backing up into the turbo. Doesn't it look like that to anyone else? Gravity doesn't go sideways for oil returns.

 

But it does have a downward bend in the line.

 

that's what i saw
looks damn near horizontal

 

The second pic was at an angle, I deleted it. The return drops a good inch and a half downards from the turbo to the pan.

 

What would I need to replace in order to run a -3an line?

 

I thought the stealthmode kits already used a -3 AN feed line?

 

My Stealth kit came with a -4 line. All you need to run a -3 line is new an fittings. Off the block fitting you'll need a 1/8 npt to -3 and off the turbo whatever size it is to -3.

 

Yeah, mine says it uses a -4an line. I thought you had to use bspt for honda blocks? Stealthmode says the 14b used a 7/16 for the inlet. So I would need a 7/16 npt to -3an and a 1/8 bspt to -3an right? Where can I find these online?

 

See first post.