turbo noob, turboing a ford 300 w/ holset h1c?
it's a 1991 f150, efi 300 (4.9l) inline 6, running around 166k miles (not a thing worn in the least on this engine) i picked up a holset h1c off of a '88-'89 cummins ram (for free, friend got it for me somehow..), truck only had 56k miles, bearings are tight side to side, very little push/pull shaft play, only problem i have is it had no wg/bov on it, and i have no downpipe.
few questions regarding it: 1. downpipe flange, can i make one from steel and weld the pipe up? 2. boost control, what's the best way? 3. since the manifold is twin-exiting 2" pipes, should i utilize the split scroll design of the turbo? i don't know if it'll benefit any more than one single pipe 4. i'm looking to make at least 7 or 8 psi, and i know i need to update the 12lb/hr injectors it has now. reccomendations? 5. the truck: http://img.photobucket.com/albums/v3...ordystance.jpg sitting right now with 2.5" straight exhaust, 2.5" true core dynomax race muffler, a 302 TB, and a cummins ram air filter |
Re: turbo noob, turboing a ford 300 w/ holset h1c?
im betting 30 views before a reply, like usual..
|
Re: turbo noob, turboing a ford 300 w/ holset h1c?
Dude, where are you from? I noticed you have zoom internet, I do too, you must be pretty local
|
Re: turbo noob, turboing a ford 300 w/ holset h1c?
1. downpipe flange, can i make one from steel and weld the pipe up?
yes 2. boost control, what's the best way? an external wastegate 3. since the manifold is twin-exiting 2" pipes, should i utilize the split scroll design of the turbo? i don't know if it'll benefit any more than one single pipe you can but not really necessary 4. i'm looking to make at least 7 or 8 psi, and i know i need to update the 12lb/hr injectors it has now. reccomendations? bigger injectors are a must, what size i dont really know lol. possibly some 30lb/hr |
Re: turbo noob, turboing a ford 300 w/ holset h1c?
Originally Posted by SinisterCRX
Dude, where are you from? I noticed you have zoom internet, I do too, you must be pretty local
|
Re: turbo noob, turboing a ford 300 w/ holset h1c?
This thing is a beast ;D
|
Re: turbo noob, turboing a ford 300 w/ holset h1c?
Originally Posted by BoosTedZSix
1. downpipe flange, can i make one from steel and weld the pipe up?
yes |
Re: turbo noob, turboing a ford 300 w/ holset h1c?
You might want to check here.
http://fordsix.com/forum/ There is a lot of info on it Also you might want to check http://www.turbomustangs.com/smf/ |
Re: turbo noob, turboing a ford 300 w/ holset h1c?
i sold the turbo to my friend now ::)
|
All times are GMT -5. The time now is 07:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands