HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   turbo a nissan p/u? (https://www.homemadeturbo.com/forced-induction-7/turbo-nissan-p-u-26499/)

stingray 09-15-2004 09:25 PM

Re:turbo a nissan p/u?
 

Originally Posted by needahonda
sr20's have been known to handle upwards of 450-500 hp with stock bottom ends....you dont see guys in japan swaping KA's in to the silvia's do ya o.0


your a jackass... he's saying why swap out an engine with potential... its stupid... and of course your not going to swap out an engine for a not as potential engine...

basically he's saying there is no need to swap, can you swap? yes

toledo240 09-16-2004 01:08 AM

Re:turbo a nissan p/u?
 
I wouldn't put a little turbo on a ka24e there just to big of engines. so at least t3/t4 is needed. with a big turbo you need bigger internals for that thing.bigger injectors,fuelpump,safc,z32mafs, external wastegate,intake manifold too,topmount turbo mainfold. These engines do have potential, but save the time and money sr20det you'll be satisfied! unless you like bigger turbos on little psi.

needahonda 09-16-2004 01:00 PM

Re:turbo a nissan p/u?
 

Originally Posted by toledo240
I wouldn't put a little turbo on a ka24e there just to big of engines. so at least t3/t4 is needed. with a big turbo you need bigger internals for that thing.bigger injectors,fuelpump,safc,z32mafs, external wastegate,intake manifold too,topmount turbo mainfold. These engines do have potential, but save the time and money sr20det you'll be satisfied! unless you like bigger turbos on little psi.

=)

Semnos 09-16-2004 05:18 PM

Re:turbo a nissan p/u?
 
Don't get the SR20DET...get the RB25DET or RB26DETT :P

platanazo64 09-17-2004 08:36 AM

Re:turbo a nissan p/u?
 
thats a horrible motor to turbochrage. he hs the the ka24e... not the DE commonly found in the 240sx. In other words... he has the single cam POS. I would advise him to get the twin cam from the 240... then start from there

idiot-stick 09-17-2004 09:41 AM

Re:turbo a nissan p/u?
 

Originally Posted by platanazo64
thats a horrible motor to turbochrage. he hs the the ka24e... not the DE commonly found in the 240sx. In other words... he has the single cam POS. I would advise him to get the twin cam from the 240... then start from there

ummmm, E's are awesome engines to boost. Where are you getting your information from? Also, from 89-89, the 240's have the SOHC E engines. Get a manifold from JGSturbo.com.

Not to mention, E's have top feed injectors. Much easier to get more fuel for cheap as opposed to the DE's side injector setup

SkunT 09-17-2004 12:41 PM

Re:turbo a nissan p/u?
 

Originally Posted by SinisterCRX


dude, where do you find this ---- at. you always have a funny one to add...

platanazo64 09-17-2004 12:50 PM

Re:turbo a nissan p/u?
 
DE's have more aftermarket support. That's why I would rather swap to that than to stick to the single cam.

idiot-stick 09-17-2004 12:56 PM

Re:turbo a nissan p/u?
 

Originally Posted by platanazo64
DE's have more aftermarket support. That's why I would rather swap to that than to stick to the single cam.

Well yeah, if you're building the motor, its easier to find internals for the DE, but if you are just doing a junkyard turbo, theres no reason not to stick with the E. Lots of guys do it http://www.nicoclub.com/zeroforum?id=131

platanazo64 09-17-2004 01:23 PM

Re:turbo a nissan p/u?
 
DE's are cheap to buy anyways... turbo the ---- out of the truck man... and if it blows, then get your self a DE


All times are GMT -5. The time now is 08:47 AM.


© 2024 MH Sub I, LLC dba Internet Brands