alright, i wanna make a sidewinder style turbo manifold for my turbo caravan to bring the turbo up front, i know this will slow spool time so dont waste your time telling me not to do it. i just need to know what type of pipeing i will need that will withoustang the heat/weight of the turbo. i will be using the stock mani and just adding to it.

 

try clicking the search tab

 

schedule 40 should work fine, dont worry about spool, they use very well sized turbos, its not like its a gt40 or anything, get er done bro

 

o/t people are starting to get pretty gay with this search button crap

 

the search engine is absolute garbage on this site! thanks for the info on the schedule 40 stuff.

 

if you know what your looking for, then you can find ----

 

actually ithe search feature has gotton better

 

indeed it has gotten better, and if used correctly, you can usuaully find what you need. However, in the 5 secs it takes for you to write "use the search button" you could have helped the guy out. Theres really no point in wasting hmts bandwidth saying "use the search button", either they already have or they dont know how.

Try to take a measurement of the manifold size, but usually people use 1.5" id sched 10 or sched 40 pipe.

 

---- the search function. It's all google images from here on out. If I wanted to read I'd go to school.

 

i will be using the stock exhaust manifold but will be using a "crossover" pipe similar to...like a twin turbo setup. it will go from the stock manifold in back wrap around so the turbo will be up front. this thing is pain in the *** to swap turbo's and i swap them offen. i figure this would be the easiest way. what would be the best place to get some schedule 40 pipe?