i was thinking about buying some ghetto ram intake off of ebay and chopping it. i would keep the vacuumm nipple for a catch can setup and of course enough to connect it to the turbo and the filter. anyone ever try this before?

 

waste of money......I just used pvc pipe with a nipple jb welded to filter

 

pvc works well..just make sure you use the purple primer and clear glue made for bigger pvc..if you use the yellow ---- made for Cpvc it getts sloppy when it warms up and ---- will start moving on you

 

just get a clamp and cut some of your moms screen door off

 

i thought u should only use a screen for a few runs down the track. i dont think its good for a daily driver u can still get like little particles that will eat away at the wheels. nothing will clean better than a filter. and besides if your using the screen thinking its gonna help spool faster your wrong. it will but not where u would even notice a diffrence. i read in a mag all the filter is doing is taking away .5 psi so its not that big of a deal. thats just my 2 cents on the screen thing.

 

i like my screen and not because i think it helps it spool quicker just because it's easy and it keeps the bigger stuff out. i have two filters i can use sitting here but just don't want to, figure if it does ---- up my turbo i can get another. kinda want a t-bird one anyways.

 

just use your old intake pipe and custom make a intake its easy. i was running a screen on my 14b and something got through,and bent some fins