turbo done.....car doesn't start.
06-06-2004, 07:37 PM
#1
0.5 BAR
Thread Starter
Join Date: Aug 2003
Posts: 140
turbo done.....car doesn't start.
alright, so everything is one and hookup on my 95 ls teg. I got hondata tuned at 6 psi. Now when i go and start the car it turns over and thats it. I adjust my fpr (aeromotive) down a little to about 25 psi. Now when i start the car it will just barley begin to start. Next i try holding down the gas and it gets it going but its running horrible and dies after about 5 seconds.
Only thing i can think of is idle screw on my im. Please help me out here.
Thanks
Only thing i can think of is idle screw on my im. Please help me out here.
Thanks
06-06-2004, 07:41 PM
#2
0.5 BAR
Thread Starter
Join Date: Aug 2003
Posts: 140
Re:turbo done.....car doesn't start.
o ya, and i am running a open downpipe with my o2 sensor just hangine away from the exahust. There is white smoke coming from the dp. I stil have my old 89 gas in the tank, and sparkand timing is good
06-06-2004, 07:43 PM
#4
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:turbo done.....car doesn't start.
What do you mean you have hondata tuned at 6psi? does this mean the car was running good for some time and you had it tuned? or it just started doing this? You just bolted the turbo on and all the ---- and now it doesnt even run? try and be a bit more specific to what you just did so we can get more of an idea.
06-06-2004, 08:04 PM
#5
0.5 BAR
Thread Starter
Join Date: Aug 2003
Posts: 140
Re:turbo done.....car doesn't start.
sorry, this is the first time i tired to run with a turbo. I got a basemap from the hondata dealer tunned to 6 psi.
450cc dsm blue tops
t3t4 turbo
tial 38mm
hks bov
truboXs boost controller
aeromotive fpr
all on b18b
450cc dsm blue tops
t3t4 turbo
tial 38mm
hks bov
truboXs boost controller
aeromotive fpr
all on b18b
06-06-2004, 08:47 PM
#8
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:turbo done.....car doesn't start.
Ok, so now you think your ecu is dead?
This whole post is very unclear, Physically bolting on the turbo setup etc etc wont change if the car starts up or not. Its either going to be your injectors (the way you wired them in) or something with your ECU.
This whole post is very unclear, Physically bolting on the turbo setup etc etc wont change if the car starts up or not. Its either going to be your injectors (the way you wired them in) or something with your ECU.
06-06-2004, 09:12 PM
#10
0.5 BAR
Thread Starter
Join Date: Aug 2003
Posts: 140
Re:turbo done.....car doesn't start.
ya, i am running on 2 hours of sleep, sorry for being so unclear. Anyway, i am at 25 psi of fuel cuase thats the best my car was running best at. I blieve the stock is 45.
Abaz, i guess your right and the idle shouldn't matter becuase a turbo is bolted up becuase its not seeing boost, correct
Thanks for the help, i am gonna go mess with injectors tomorrow. Hopefully i just wired the injectors in the wrong order.
Abaz, i guess your right and the idle shouldn't matter becuase a turbo is bolted up becuase its not seeing boost, correct
Thanks for the help, i am gonna go mess with injectors tomorrow. Hopefully i just wired the injectors in the wrong order.
