Turbo chips ( no, not a fungun eating contest )
#1
Turbo chips ( no, not a fungun eating contest )
I want to get my ecu chipped wit the following things modified. Can anyone point me to someone that can get it done ?
PM6 90-91
7600 RPM limiter
beable to see boost without throwing the code
Timing retarded for 16psi
fuel maps for DSM 450ccs
including prices would help too.
PM6 90-91
7600 RPM limiter
beable to see boost without throwing the code
Timing retarded for 16psi
fuel maps for DSM 450ccs
including prices would help too.
#2
Re:Turbo chips ( no, not a fungun eating contest )
I'm not sure if Joseph does OBD0 chips, but he did my OBD1 ECU an it works great. I have launch control(which is really really cool!), 1 degree retard per pound of boost, higher rev limit(7200 right now I think), and it controls my 450cc injectors. I ordered a burned which should be here tommorrow so I can adjust a few small things. Right now as it is I think it is better than my AFC and it hasn't even been tuned yet.
I would highly recommend him for any electronic work. Joseph Davis is his screen name and he mods the "engine management" forum here.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
I would highly recommend him for any electronic work. Joseph Davis is his screen name and he mods the "engine management" forum here.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#3
Re:Turbo chips ( no, not a fungun eating contest )
try www.hyperducktuning.com he did three of mine CHEAP too and he will do anything you want as in mapping Vtec etc
#5
Re:Turbo chips ( no, not a fungun eating contest )
http://www.ghettodyne.com
http://www.zdyne.com
thank me l8r
ghettodyne is free except for the actual cost of the rom burner and chips (and computer, but ill assume since u are on HMT u have one of those). It also requires you to pop open your ecu and replacec a chip with a ZIF socket. Im sure some1 on here with experience in it can do it for a fee.
http://www.zdyne.com
thank me l8r
ghettodyne is free except for the actual cost of the rom burner and chips (and computer, but ill assume since u are on HMT u have one of those). It also requires you to pop open your ecu and replacec a chip with a ZIF socket. Im sure some1 on here with experience in it can do it for a fee.
#6
Re:Turbo chips ( no, not a fungun eating contest )
What I meant was you can just pick a basic set program for turbos and change it to whatever you want and it will only cast you 15$ for the chip, thats if you have the board soldered in your ECU if not he will do that for you and give you three chips for like $80 shipped.
#7
Re:Turbo chips ( no, not a fungun eating contest )
ya thats what i said..
you buy the ROM Burner (so you can create/write chips). atleast 1 blank chip. Get your ecu re-soldered to accept quick connect chips and create your own map.
Ghettodyne comes w/ a NA bin file for 240cc injectors aswell as a bin file setup for boost w/ 450cc injectors and timing retard per boost.
go to www.ghettodyne.com and read everything there.
you buy the ROM Burner (so you can create/write chips). atleast 1 blank chip. Get your ecu re-soldered to accept quick connect chips and create your own map.
Ghettodyne comes w/ a NA bin file for 240cc injectors aswell as a bin file setup for boost w/ 450cc injectors and timing retard per boost.
go to www.ghettodyne.com and read everything there.
#10
Re:Turbo chips ( no, not a fungun eating contest )
Funny, a lot of people make fun of honda guys, but they hate the fact that they are so damn easy to modify.
I'm right there with the Jbody guys when it comes to my TT stealth.... BIG MONEY for everything, even getto stuff.
I'm right there with the Jbody guys when it comes to my TT stealth.... BIG MONEY for everything, even getto stuff.