Turbo Calculator and map plotter
#1
Turbo Calculator and map plotter
This has probably been posted somewhere before, maybe even one of the links on the sticky's.
Just in case though, it's pretty decent plotter, enter your specs then select any of the turbo's in the grey box to see your engine plotted on that snail's map.
http://www.---------------/turbocalc/index.php
Not to mention a library of damn near every brand/style turbo compressor map you could want.
Just in case though, it's pretty decent plotter, enter your specs then select any of the turbo's in the grey box to see your engine plotted on that snail's map.
http://www.---------------/turbocalc/index.php
Not to mention a library of damn near every brand/style turbo compressor map you could want.
#7
Re: Turbo Calculator and map plotter
The only things you really need to mess around with are your target power, engine size, AFR, BSFC, engine speeds, and intake temperatures. The approximate VEs at redline, peak power, max boost and min boost are good approximations, so you can leave them alone.
If in doubt, just play with your HP number and engine speeds (RPM) and use the following for:
AFR = 11.8
BSFC = 0.48
intake temperatures = 100 (for all of them)
And then just start looking at turbos. Easy peasy.
If in doubt, just play with your HP number and engine speeds (RPM) and use the following for:
AFR = 11.8
BSFC = 0.48
intake temperatures = 100 (for all of them)
And then just start looking at turbos. Easy peasy.