turbo bike?
#1
turbo bike?
Hello all,
gonna try and turbo my old 79 Yamaha Xs11. gonna try a blow through carbed setup. I did use the search function but didn't find much. Anyone got any ideas what size, type turbo I can use. bike has 1068cc motor, everything( motor internals) is stock. looking for 5-10 lbs boost. Stock HP is 90. Going to try and build my header,any help would be great.
thanks
some pics for the pictue people ( I am one )
gonna try and turbo my old 79 Yamaha Xs11. gonna try a blow through carbed setup. I did use the search function but didn't find much. Anyone got any ideas what size, type turbo I can use. bike has 1068cc motor, everything( motor internals) is stock. looking for 5-10 lbs boost. Stock HP is 90. Going to try and build my header,any help would be great.
thanks
some pics for the pictue people ( I am one )
#2
I know all the parts I will need, having trouble finding a fuel pump (external) that can put out 5-15 psi though for cheapish. the cheap ones go up to 10psi, then there re the cazy support up to 1200 hp PUMPS that are really expensive. thats all I can find anyway
#4
Holley 12-927 Inline Electric Fuel Pump TBI 43gph 15psi:eBay Motors (item 330349754492 end time Sep-02-09 15:23:14 PDT)
Small Turbo:eBay Motors (item 150364025422 end time Aug-12-09 10:22:18 PDT)
Turbocharger (Very Small) RHB32 Equivalent-NEW:eBay Motors (item 230364501262 end time Aug-12-09 17:291 PDT)
seriously it took all of three minutes to find what you were "searching" for
Small Turbo:eBay Motors (item 150364025422 end time Aug-12-09 10:22:18 PDT)
Turbocharger (Very Small) RHB32 Equivalent-NEW:eBay Motors (item 230364501262 end time Aug-12-09 17:291 PDT)
seriously it took all of three minutes to find what you were "searching" for
#5
^had one of these bikes in the 80'z,no 2nd gear (had to upshift 2x's to 3rd).To this day I still wanna miss 2nd due to it... Seen the small turbos on ebay (new even),thought about grabbing one to boozt a lil bike or go kart
and use a fpr,or a 2nd carbed bike pump...
and use a fpr,or a 2nd carbed bike pump...
Last edited by BiGZ; 08-16-2009 at 03:14 AM.
#6
A K03 from a volks/Audi will fill the bill perfectly, this what I use for a VTR1000F and it spools from 3500 RPM @ 4 PSI to 9500 RPM @ 8 PSI.
Not sure about the carbs tough, try busa throttle bodies or any 180 hp bike should have injectors big enough, try Microsquirt as EFI, the board only version cost 200 $
But carbs will work, but off boost they will run pig rich to be right on under boost.
Not sure about the carbs tough, try busa throttle bodies or any 180 hp bike should have injectors big enough, try Microsquirt as EFI, the board only version cost 200 $
But carbs will work, but off boost they will run pig rich to be right on under boost.
Thread
Thread Starter
Forum
Replies
Last Post
Turblow
General Discussion
97
02-25-2007 12:11 PM