HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Turbo B16a (https://www.homemadeturbo.com/forced-induction-7/turbo-b16a-33696/)

daacuradude 01-21-2005 07:12 PM

Turbo B16a
 

I just installed a turbo on my b16a with 450's and an afc on 7 pounds,its running great accept sometimes when I stop or let it set for a min it smokes.I am running open dp so I get the joy of smelling it and it smells like fuel but its kind of looks like oil smoke? I have put about 150 miles on it and the oil seems to be fine maybe a little useage witch I thought was normal with the turbo? My friend J.Davis (who is doing my tuning when I get OBD1 ecu and adapter harnes!!!) set the afc to run the 450s a lil rich till then so i figure it might be a combonation of both? The only other thing is that the drain line that i had to use due to lack of funds ??? is kind of small!Any way thx for any info or knocks for the afc 450 injectors lol

djfob 01-21-2005 07:38 PM

Re:Turbo B16a
 
I'd just switch to a bigger line like a -10 and see what happens. Either that or the turbo is getting too much oil pressure.

daacuradude 01-21-2005 07:50 PM

Re:Turbo B16a
 
That was my other worry but i have no way of checking the oil pressure till next week so.........? I wont be driving it much till then so would the oil backing up or over feeding hurt it till then not pulling boost..unless a mustang rolls up on me i have been waiting along time to put a light blue stripe down the side of one lol

B16Drag 01-21-2005 10:16 PM

Re:Turbo B16a
 
dont be stupid. wait for your oil gauge.

robs99si 01-22-2005 05:51 AM

Re:Turbo B16a
 
check the pcv valve and replace it or clean it if it's too clogged. a bigger oil line will give more oil pressure so i'd run a -3an or -4an.

daacuradude 01-22-2005 11:19 AM

Re:Turbo B16a
 
the feed line is a 4an its the return line that is small witch i guess might be restricting the the flow ?

daacuradude 01-23-2005 11:30 AM

Re:Turbo B16a
 
Ok lastnight when i got back from a short ride when i let the car run for a min befor shuting it off it smoked like a sob for about a min or 2.I am sure its not the rings the smoke was very heavy and then just stoped.Befor i installed the turbo i checked for shaft play and it did have very slight play in and out but i thought it wouldnt be bad enough to creat a problem,could this be it??

B16Drag 01-23-2005 11:39 AM

Re:Turbo B16a
 
slight shaft play is usually normal.

90accordIHI 01-23-2005 11:41 AM

Re:Turbo B16a
 
check your charge pipes for oil.

if there's some there, you need a rebuild my friend

daacuradude 01-24-2005 09:28 AM

Re:Turbo B16a
 
Well I guess im going to try the bigger drain line and if that does not help where is the best place to get a rebuild kit for a t3???


All times are GMT -5. The time now is 12:06 PM.


© 2024 MH Sub I, LLC dba Internet Brands