HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   turbo on 11.1 compression ratio (https://www.homemadeturbo.com/forced-induction-7/turbo-11-1-compression-ratio-39196/)

lumpenst 05-09-2005 06:31 PM

turbo on 11.1 compression ratio
 
hey guys... i own a civic and was planning on going turbo but now im gonna buy a new car a citroen c2 vtr and im troubled because this car has a 11.1 :1 compressinon ratio!! i want to build a low budget low boost turbo onthis car but i think its very risky to go turbo with this CR... is there any solution to this (and it should be cheap) im planning to use stock internals.... any way to lower compression ratio or can it be solved by just retarding timing?? i know this is a nooby question but im desperately in need of help :) any suggestions???

crx2fast 05-09-2005 06:45 PM

Re: turbo on 11.1 compression ratio
 
well a thicker headgasket usualy works, that will bring it down a tad. i'm not really sure what those cars are capable of because we dont have them here in the US.
i would think "DutchPug" might be more helpfull with this kinda car.
but there has been people who have turbo'd with a ratio like that. its all in the tunning ;)

lumpenst 05-09-2005 06:50 PM

Re: turbo on 11.1 compression ratio
 
i know about thicker head gasket solution but ive been told that it is not reliable... is this true and how much thicker can it handle??

david_jones001 05-09-2005 07:03 PM

Re: turbo on 11.1 compression ratio
 
as long as u have a good tuner and fuel, ur str8

garn 05-09-2005 09:17 PM

Re: turbo on 11.1 compression ratio
 

Originally Posted by lumpenst
hey guys... i own a civic and was planning on going turbo but now im gonna buy a new car a citroen c2 vtr and im troubled because this car has a 11.1 :1 compressinon ratio!! i want to build a low budget low boost turbo onthis car but i think its very risky to go turbo with this CR... is there any solution to this (and it should be cheap) im planning to use stock internals.... any way to lower compression ratio or can it be solved by just retarding timing?? i know this is a nooby question but im desperately in need of help :) any suggestions???

tuning will be very picky, so that is crucial with high compression FI engines, but I would love to go that route one day!

Semnos 05-09-2005 11:19 PM

Re: turbo on 11.1 compression ratio
 
you would have to go standalone to tune it properly at that high a compression.
Or use plate inbetween 2 head gaskets..like Dutchpug does....He can let them make them for you at a pretty good price...

bermanator 05-10-2005 12:10 AM

Re: turbo on 11.1 compression ratio
 
high comp FI is where its at if you can get a good tune going, maybe using megasquirt n spark youd be more than happy. youd probably have to run race fuel to really get some decent boost out of it.

Xgenturbo 05-10-2005 12:50 AM

Re: turbo on 11.1 compression ratio
 
One bad tune and ... BOOM

DutchPug 05-10-2005 11:01 AM

Re: turbo on 11.1 compression ratio
 
Yups a head plate and two head gaskets works like a charm and is cheap ;D.

You can buy a head plate for your engine (TU5JP4) at http://www.dp-engineering.nl


bonestock94 05-11-2005 04:09 AM

Re: turbo on 11.1 compression ratio
 
good tuner + lots of race gas.

better off going high CR NA and a little bit of nitrous on the side. nitrous loves high CR.


All times are GMT -5. The time now is 03:30 PM.


© 2024 MH Sub I, LLC dba Internet Brands