Elite CRX

I finally bought my turbo Has no shaft play what so ever and its in perfect condition. It has this serial number engraved in the turbo TDO4L and it suposebly(sp?) came out of a Status Turbo 2.4L, does anybody have specifications for this can of turbo? Thanx

Elite CRX

Anybody?

HMT-Admin

interesting turbo, have any pics? that turbo is an aftermarket upgrade for the Mitsu 3000gt or it could be the factory one..

TDO4L-13G-6CM2 360 CFM
TDO4L-15C-8.5CM2 390 CFM

that is what they flow at.

Would probably work "OK" on a stock D-series,

Jeff

Elite CRX

I will post some pics tomorrow, I dont no how to post, so anybody with any info. will be appreciated. Also AbaZ do you know what the wastegate is set at? Is this a good turbo?

Elite CRX

?

89 CRX Si

to post goto a pics server site. geocities , imagestation.com etc. uplaod them then copy paste the lin k here

Elite CRX

Ok, AbaZ you're right it is an upgrade for the VR-4. But I found very little info. on them so if anybody can shine some light on the specs. it will be appreciated. Thanx

HMT-Admin

My guess is that the actuators are set pretty low, since its a twin setup, My guess is somewhere from 6-8psi. The best way is to put it on and find out. Or get a hand pump with a gauge to see when the wastegate starts to open.

Jeff

Elite CRX

Here it is for your viewing pleasures:

http://www.geocities.com/r_gabaldon/DSC00761.JPG
http://www.geocities.com/r_gabaldon/DSC00762.JPG
http://www.geocities.com/r_gabaldon/DSC00763.JPG
http://www.geocities.com/r_gabaldon/DSC00764.JPG
http://www.geocities.com/r_gabaldon/DSC00760.JPG
Tell me what you guys think?

Elite CRX

OK,this should work now! My bad