Tuning a supercharged b16a engine with a fields vtec controller
#1
Tuning a supercharged b16a engine with a fields vtec controller
I have a b16a with a jackson racing supercharger kit on it with upgraded pulley (8psi), fuel pump and rising rate regulator. I am looking for any information regarding tuning your fuel setting with a fields vtec/fuel controller on this engine.
Any links were people have the same setup that i have i.e. supercharged b16a and a fields vtec controller on it. So at least i can start some where and then do my own tuning after. I know that I should see pretty good results with the fields on a FI engine.
Thanks in advance.
Any links were people have the same setup that i have i.e. supercharged b16a and a fields vtec controller on it. So at least i can start some where and then do my own tuning after. I know that I should see pretty good results with the fields on a FI engine.
Thanks in advance.
#2
Re:Tuning a supercharged b16a engine with a fields vtec controller
We've use the Fields controller on a D16 turbo engine, and honestly the best way to tune it is going to be on a Dyno with Wideband o2 support, just so you can get everything dialed in.
Jeff
Jeff
#3
Re:Tuning a supercharged b16a engine with a fields vtec controller
I don't have the option of a dyno right now so are there any links to differnet web sites that have different setups of FI and tuned with a fields that i can guage by?
#4
Re:Tuning a supercharged b16a engine with a fields vtec controller
highly unlikly.. probably only a handful of people that are running the fields with similar setups, and I doubt anyone here has them documented.. I think your best bet is using the good ol'e *** dyno and a air/fuel gauge.. That will get you somewhere
Jeff
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
TurboNX2000
Hybrid/Tech
4
04-01-2004 12:13 PM