TunerToys Intercooler Piping Kit
 

Hey guys,
I have some questions regarding the IC piping kits on a 93 Civic Hatchback.

http://www.---------------------------/pipes.jpg

In the following pic off the throttle body I would use the 45" bend I presume. Also on each end of the IC I would use a Ubend.

With the remaining u bend would I cut it in half and go straight down where the filter is in this pic and then turn it to connect to the ubend coming from the IC? I just want some opinions on this before I hack the pipes up and ruin them.

http://www.imagestation.com/picture/...e/fa7c0fa7.jpg

http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

Re: TunerToys Intercooler Piping Kit
 

http://liam821.com/pix/car/Garage-Fu...4/DSC01355.JPG

Re: TunerToys Intercooler Piping Kit
 

Yes.

If you ---- ---- up then put a coupler there, it will even add flexability to your system.

I run the same kit, didn't really look into ---- before I did it. Buy the kit, open it up, mock ---- up and go. Simple as that.

Re: TunerToys Intercooler Piping Kit
 

whats the brown thing blockin your ic?

Re: TunerToys Intercooler Piping Kit
 

probably cardboard to protect the fins.

Re: TunerToys Intercooler Piping Kit
 

i bought the same kit but used it a little different, i sue the v looking one at the throttle body, then the straight one for my bov, then cut a 180 into 2 pieaces and use them as j bends to go down into the intercooler