TunerToys Intercooler Piping Kit
Thread Starter
0.5 BAR
Joined: Jun 2004
Posts: 149
TunerToys Intercooler Piping Kit
Hey guys,
I have some questions regarding the IC piping kits on a 93 Civic Hatchback.
In the following pic off the throttle body I would use the 45" bend I presume. Also on each end of the IC I would use a Ubend.
With the remaining u bend would I cut it in half and go straight down where the filter is in this pic and then turn it to connect to the ubend coming from the IC? I just want some opinions on this before I hack the pipes up and ruin them.
I have some questions regarding the IC piping kits on a 93 Civic Hatchback.
In the following pic off the throttle body I would use the 45" bend I presume. Also on each end of the IC I would use a Ubend.
With the remaining u bend would I cut it in half and go straight down where the filter is in this pic and then turn it to connect to the ubend coming from the IC? I just want some opinions on this before I hack the pipes up and ruin them.
Guest
Posts: n/a
Re: TunerToys Intercooler Piping Kit
Yes.
If you ---- ---- up then put a coupler there, it will even add flexability to your system.
I run the same kit, didn't really look into ---- before I did it. Buy the kit, open it up, mock ---- up and go. Simple as that.
If you ---- ---- up then put a coupler there, it will even add flexability to your system.
I run the same kit, didn't really look into ---- before I did it. Buy the kit, open it up, mock ---- up and go. Simple as that.
1.0 BAR
Joined: Sep 2003
Posts: 600
Re: TunerToys Intercooler Piping Kit
i bought the same kit but used it a little different, i sue the v looking one at the throttle body, then the straight one for my bov, then cut a 180 into 2 pieaces and use them as j bends to go down into the intercooler
Thread
Thread Starter
Forum
Replies
Last Post
soontobeDA
Turbo Parts For Sale
5
May 17, 2006 12:38 AM
