Tilt

Can someone please provide the torque (FT/LBs) and bolt stretch specifications for the TunerToys D-series H-Beam Rods? I did not receive any specs in the packaging from tunertoys . I would normally wait for them to reply back to me but I am in a hurry to get these installed.

I looked for ARP 9mm 8740 bolts (from my understanding this is what tunertoys use for the bolts) on arp-bolts.com but could not find its specification.
This is what they had:
HONDA
1.2L to 1.8L, 8mm 208-6001 High Perf 8740 stretch .0055in torque 26ft/lb
1.8L, 9mm 208-6401 Pro-Series 2000 stretch .0077in torque 40ft/lb

TunerToys

Hey Tilt,

We also responded to this post on HT...

The specs you have listed are the same we use for the rods. We have a complete install guide going together, but it is still a few weeks from publishing.

Craig

Tilt

Yeah, saw it. Thanks again.

Semnos

I read it on HT...
So the rod's won't hold above 8000 rpm's?
What about for the B-series? stock rev limit is a tad above 8000..

Semnos

bump..answer?