T's in oil feed line
 

hey everyone, i was thinking about my oil feed line and how many times i'm going to be putting T's in it and i'm just wondering if it's bad to T an oil line this many times. here's my diagram,

Block - BSPT-NPT adapter - T fitting - Stock oil pressure sensor - -4AN line to T fitting - Aftermarket oil pressure sensor - T fitting - Aftermarket oil temp sensor - Oil pressure needle valve - T fitting - Mechanical Oil Pressure guage (installed directly to T fitting) - -4AN line to turbo

now if you can understand that, let me know what you think. if someone can't understand it i'll try my best to draw a picture :) if anyone else can draw a picture of that then i'll be amazed. thanks for any help guys.
-Kaelon

Re:T's in oil feed line
 

I think you'll just have to add more oil ;D I don't think it would be a problem.

Re:T's in oil feed line
 

i think it'll be ok

Beau

Re:T's in oil feed line
 

The wholes system is always under pressure kinda like you vac lines you can keep adding but the vac always comes back. You will be fine also considering most of your t's are only used for sensors and not to supply and devices with oil.

Re:T's in oil feed line
 

Yea, what he said ;D

Re:T's in oil feed line
 

Good god what in the hell did I say there?

Re:T's in oil feed line
 

:D well i think i understood it and if you meant that oil lines are always under pressure just like vac lines and that since most of the t's are for sensors it should be ok - then were good