what throttle bodies are you guys running?! all these honda ones are aluminum, are the chevy ones steel? i want to weld it stright to the ehxuats pipe...

 

universal choke cable from any parts store should work

instead of welding it why not clamp it

 

thats not a bad idea, ill have to go check some out here soon... thanks

 

got any pics of how you clamped it

 

i don't run a cutout. i just had the idea.

 

hmm.. i just gotta find a way to make it work.. i may need to find a different type of throttle body mabye

 

About 4 ft off your downpipe, add this:

http://www.jegs.com/p/Dynomax/761547/10002/-1


Add the throttle body to one end and voila.

I had one of these cutouts laying around. I just never got around to adding a flapper and integrateing it into the downpipe. ----, my downpipe was only 2 feet long because i was such a lazy ----------er...... Shop wasn't even 5 minutes down the road.

 

yea imean making that little piece is no problem.. its the whole getting the throttle body welded/bolted/ clamped to the exhaust is what im trying to figure out. the choke cable is a great idea cause you can buy a locking one, so that wont be a problem...


thanks,

matt

 

NAPA has the stainless exhaust clamps that are like 8" long and strap around the pipe, use pipe and a clamp the same OD as the TB.

 

i talked to slos13, who did the same on his miata. ill use a stock d series throttle body, cause they fit real tight in a 2.5in echaust, and i bought the choke cable which should work pretty good, lets see!