is there a flange for this kind of turbo
 

i need a flange for the exhaust so it seat flush on my manifold.as you can see its kind of rounded i need a flange thats the same on one side and square on the other side here is the turbo https://www.homemadeturbo.com/forum/...446#msg1103446

Re: is there a flange for this kind of turbo
 

i'd like to see things from your point of view, but i can't fit my head that far up my ass.

Re: is there a flange for this kind of turbo
 

post edited sorry.

Re: is there a flange for this kind of turbo
 

you need a t3/4-70861 flange. I make them for 29.00 shipped or 35.00 for stainless

paypal= dumbtwat@hotmale.com

Re: is there a flange for this kind of turbo
 

you have a pic

Re: is there a flange for this kind of turbo
 

Re: is there a flange for this kind of turbo
 

It was a joke :P

Now that you have pics, you can mill that bitch flat and use a regular t3 flange.

Re: is there a flange for this kind of turbo
 

You can just swap to a normal T3 flanged hotside as well. You can get them cheap. I have one I'd sell. It's a .63, so would be a bit bigger too and flow much nicer. You can also just fill that Volvo flange. Fill it with weld and then grind or sand it down until it's flat. It's not rocket science.

Re: is there a flange for this kind of turbo
 

when will my flange ship. Can I ahve it by this monday my vtech project needs it. Will you sponzer me and my boyz?

Re: is there a flange for this kind of turbo
 

I think that is for hooking up a standard T3 flange to a volvo manifold...
Just mill it down it only cost me $20.