planning to put it on my b16. searched but haven't found any info bout this but comp housing is similar to the 20g. any feedbacks? flowmaps? its an MHI turbo by the way.

 

yeh good size turbo
I'm also the map of all flowmaps

 

Any ideas what it came off of? Closest thing I have is a tdo6h/17c map from cyclone's and typhoon's. Tdo6 refers to the size of the exhaust wheel, the "H" means high output, and more than likely has a 7cm^2 exhaust housing. 14c refers to the compressor wheel and housing.

 

well, came of a diesel truck http://www.zageturbo.com/diesel.htm

SSAC on ebay is selling a similar turbine and claiming it as a 20g. anyone who have actually used it? wondering what rpm i'll hit full boost and if its good up to 8k..

 

3500-4500 , its definately good for 8K and beyond.

 

ok so here are the measurements. the propeller on the compressor wheel has 12 fins and 1.5" in diameter while the turbine side also has 12 and 2" in diameter. any inputs on the power output?

 

anyone?

 

Power output of the turbo itslef or power output on your b16?
B16 300whp with a good tune

 

any inputs? the compressor wheel is smaller than the turbine wheel.

 

http://www.zageturbo.com/TB4142.htm

i passed up on this turbo for $50 because i didnt have $50