Re: Talk to me about Holset Turbos...
what are the specs on the T04?, i need something that will push about 350 on a 2.0.
|
Re: Talk to me about Holset Turbos...
Originally Posted by rawr
what are the specs on the T04?, i need something that will push about 350 on a 2.0.
Standard "S"-Trim turbo. It should do 350whp and on a 2.0 liter should get 10psi around 3.5k if I had to guess, but there are variables as you know. In my mind it may be running out of breath and if you plan on going further and further with the same turbo I'd say you MAY want something larger. Don't know for sure. http://www.blaastperformance.com/index.php?p=t3t04bs Identical to that.
Originally Posted by sikcrx89
how much for the to4b??
PM'd. JP |
Re: Talk to me about Holset Turbos...
Why not swap out the compressor side to V trim or something like that? Be a lot easier than adapting to a Holset...
|
Re: Talk to me about Holset Turbos...
Originally Posted by ososlohatch
i was told by the guy at a hydrolic shop they were "standard pipe thread"
|
Re: Talk to me about Holset Turbos...
12x1.5mm inlet standard T3 drain and HY35 would be perfect for you O0
|
Re: Talk to me about Holset Turbos...
Originally Posted by 90dx
12x1.5mm inlet standard T3 drain and HY35 would be perfect for you O0
HY35 = 9cm tubine = .63 comparable? The inlet is different? Ahh, where could I snatch that feed fitting? Looks like Dad needs to work some set screw restrictor magic again... ;) JP |
Re: Talk to me about Holset Turbos...
Josh, like I said on AIM, its not worth it. Why are you continually getting bigger turbos and leaving the engine stock, with no intentions of EVER building up the engine?
|
Re: Talk to me about Holset Turbos...
Originally Posted by SinisterCRX
Josh, like I said on AIM, its not worth it. Why are you continually getting bigger turbos and leaving the engine stock, with no intentions of EVER building up the engine?
|
Re: Talk to me about Holset Turbos...
Originally Posted by SinisterCRX
Josh, like I said on AIM, its not worth it. Why are you continually getting bigger turbos and leaving the engine stock, with no intentions of EVER building up the engine?
Powerband. NOTHING beats the late hit of a large flowing CFM turbo. JP |
Re: Talk to me about Holset Turbos...
Originally Posted by c0mpl3x
h1c is circa 1987, slightly smaller, hx and hy are same size for the most part, any of them will make you 250whp
hx35 is capable of 450 whp with ease |
All times are GMT -5. The time now is 05:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands