T3 on a H22@6psi
 

Think its too small?

Re:T3 on a H22@6psi
 

think you need to give more details, and maybe read the FAQ

Re:T3 on a H22@6psi
 

too small.

Re:T3 on a H22@6psi
 

Details:It is a stock h22a, in a 4th gen prelude. There is a t3 for sale in the classifieds with a 42/48 trim. I have seen similar ones for sale for a pretty low price. i wanted to stay as small as possible to keep the install clean, while keeping my A/C. i thought a T3 would be pushing it, i was just looking for some feedback.


I have read the faq, lots of good info but i havn't seen any info that pertains to this specific question. if you have found it, i would greatly appreciate to know where it is in the faq

Re:T3 on a H22@6psi
 

t3 with 42/48 trim is a little small, but for the h22, with its weak internals, 6psi with that turbo might be fine. the stock internals on the h22 are very weak compared to other honda motors when exposed to boost. i would say 6-8 psi max on that engine. build it up some and you'll be able to tear some ---- up

Re:T3 on a H22@6psi
 

A t3 .60/.63 would be a better choice. I have one on sale over at the classifieds. What's ur email, so I can send you some pictures of the T3.

Re:T3 on a H22@6psi
 

thanks for the info. i am planning to max at 6 psi. i like my motor in working condition. besides my friends b18c @ 6psi is more power than i would want for a daily driver (for now).
email:jminorics@yahoo.com

Re:T3 on a H22@6psi
 

the turbo was sold. Better luck next time. Check out mjmturbos.com , they have some great deals and they have all the parts in stock

Re:T3 on a H22@6psi
 

6 psi on dat H22A will give you the same if not more power than the B18C1.

Re:T3 on a H22@6psi
 

Yes 6 psi is fine and that t3 would work, it will spool up very fast, but none the less your only shooting for 6psi.