looking for around 250 hp goal

 

Thats a great fit. Could go a bit larger though.

 

how about the t3 60/48 or just change out exchaut housing to a 63

 

yup, but if you got it use it.

 

My 60/63 made 237 at 8ish psi, and 274 at 14psi. B16

 

I snagged one for my D16 on roids. Hopefully mated to a ramhorn, 3"open d/p, some nice headwork and sheetmetal intake along with 16psi I'll see 300

 

I also have a b16 and I just orded a T3/TO4B S trim with .63 a/r and .60 compressor. My T3 with .48 a/r and .60 compressor is smokeing a lot so i thought I should up grade. And run less oil pressure :P to my turbo. I am hopping for a little more top end with the new turbo.

 

mine made 240whp at 11 psi on a stock b16 with stock cat and stock exhaust. with just an exhaust upgrade it would have been 250 or more i'm sure. that's a perfect turbo if all you want is 250whp.

 

Same here. But going for about 320 at 18psi.