T25 to 14b swap
#1
T25 to 14b swap
how much of a change would it be to swap out my T25 for a 14b? the flanges are the same right? but would it sit in there right? would i just have to weld a flange on the end of the charge pipe? or would i need to rerun it? does anyone have a T25 and a 14b that they could put side by side and take pictures of?
#2
Re:T25 to 14b swap
The flanges arent the same and neither are the wastegates. The oil feed line on the t25 doesnt use a bango type like the 14b it uses a screw in type thing. Also the air outlet on the t25 is at a different place than the 14b so you will have to change your charge piping a little bit.
#5
Re:T25 to 14b swap
why would i need a new wastegate? they are internal. do you mean an actuator?
on top of that i'd need a new feed line.
and i'd need to ---- up m beautiful chargepipes.
I wish I had gone with a 14b from the beginnin but now that i havn't i'm confident i can make the t25 setup work well. and when I outgrow the turbo eventually, i'll upgrade it to a t28 or a big T28
on top of that i'd need a new feed line.
and i'd need to ---- up m beautiful chargepipes.
I wish I had gone with a 14b from the beginnin but now that i havn't i'm confident i can make the t25 setup work well. and when I outgrow the turbo eventually, i'll upgrade it to a t28 or a big T28