drunkinmaster1

youre going to need the connecting rods, otherwise the whole point of getting the vitaras is pretty much pointless.
d-series rods = toothpicks

hany

anyway i will search in other sites but if anyone has advice in installing will be thanks

ekhatchback99

Installation on aftermarket rods its pretty easy since the pistons are floating style wrist pins, just as all the aftermarket pistons out there.. So you just basically put the piston in the rod, slide the wrist pin between the rod and pistons, and then secure the wrist pins with the provided C clips..Thats it.. It took me 10 minutes to install all 4 pistons into my rods.

Make sure you spray WD-40 or put engine oil on the wrist pin so that it slides easier.

beerbongskickass

My advice would be, if your spending a decent amount of money building your motor, get some good forged pistons and do it right the first time. If your building it yourself and trying to spend as little as possible, go with vitaras.

bulldogg9279

while your at it. get it sleaved.

hany

which sleeves you you meen to use the vitara or z6 ?

and did you mean with TT the audi TT ?

RNPoo7

TT = tuner toys rods

http://tunertoys.zoovy.com/category/connectingrods/

ryan89crx

i seriously hope you are joking

bitchasscracker

i was just thinking of how stupid of a statement that was

bulldogg9279

yup im joking. just giving the same advice beerbong is.