stock clutch + 5psi???
 

I'm getting ready to swap my auto over to manual. So I need to go ahead and address the clutch issue (if any)
I'm gonna be pushing about 5psi to be safe on a d16z6. Will my stock clutch hold up or will I have a lot of slippage?

Re: stock clutch + 5psi???
 

It might hold fine, try it.

Mine held to 8 psi on a 48/60 turbo, d15b7

Re: stock clutch + 5psi???
 

The stock clutch in my b7 held 12psi fine from a teo4h, from what I hear most people have problems with stock clutches around the 200-220whp range

Re: stock clutch + 5psi???
 

thanks for the input guys

Re: stock clutch + 5psi???
 

yeah as long as the clutch isnt bad to start with it shoukd hold fine.

Re: stock clutch + 5psi???
 

yea

Re: stock clutch + 5psi???
 

yea like mine having 300k on stock errthang. i ran 8psi with a t25 and it slipped like holy ----. as soon as boost kicked it was reving. ha but id just buy a damn 150 clutch kit from XTD and cALL it a day. dont forget your flywheel!!! :6 ive ran mine on 8 psi 6 puck sprung and it holds nice

Re: stock clutch + 5psi???
 

Yea i was thinking about going with a 6 puck but wasn't sure which company I should go with I'll check XTD out

Re: stock clutch + 5psi???
 

or try lsd's clutches. can't go wrong. He's a sponsor. Little more expensive, but mad good customer support

Re: stock clutch + 5psi???
 

while its out, toss a decent clutch in there in case you ever decide to make some more power