I saw on ebay they sell this type of oil inlet flage and its so small and says it helps with restricting oil, should i still use a oil restrictor or do you think this will restrict it enought?

http://cgi.ebay.com/ebaymotors/T3-T4...spagenameZWDVW

 

Just buy a feed line from stealth.


That feed sux. It doesn't come with a 90* fitting to go into the turbo. Line will hit the hood.

 

Just looked at it and it looks like ----. My buddy just used one of those kits and it took a ---- on him. My stealthmode kit lasted forever!

Its quality mang...

...and you gots ta pay for dat!

 

Like 4.50, but still. That stuff is ----.

 

More. A straight is cheap, not the 90s and 45s.

The worst part about those lines is the vinyl that is used inside. They don't use oil-resistant rubber. It's vinyl, and I have seen a couple fail, OIL EVERYWHERE.

 

Honda motors are not 1/8 npt. Its 1/8 bspt.

 

that oil inlet is a restrictor. you will not need an additional one with that.

 

i think a flange and gasket on the oil feed side is just an opportunity for leakage.
Why not simply screwing a oil fitting directly in the hole?